Virmin UK issues

[fubofo]

Hey guys does anyone have any information regarding whats going on with Virmin in the UK ? all the modems are being hit and its driving me nuts.

here is a log I managed to obtain in the 5 seconds between shoing operational and going into constant ranging:

earing in mind -
Area = Belfast, UK
BPI = disabled
modem MAC = brand new, untested, presumed workng
NIC MAC = brand new, untested, presumed wprking
config = unforced
modem = Motorola SB5101
firmware - Haxorware 1.1 rev30

Code:

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.04.07 22:33:13 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: root
Password: *****
Welcome.

CM>
CM> 0x00012142 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RngRspMsgEvent:  (CmDocsisCtlThread) Received a RNG-RSP with ABORT!  Going elsewhere...
0x0001214c [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler:  (CmDocsisCtlThread)  reason: 7 (kRngRspAbortStatus)
0x0001214c [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent:  (CmDocsisCtlThread)  reason: 7 (kRngRspAbortStatus)
BcmCmDocsisStatusEventCodes::kCmIsNotOperational
0x0001214c [CmDocsisCtlThread] BcmVendorCmApplication::StartDhcpServer:  (VendorExtension CmApp) Starting DHCP Server!
0x0001214c [IGMP Thread] BcmIgmpThread::Stopping Igmp Thread...:  (IGMP Thread)
CamDeleteAddress: Deleted address from cam segment 0
Logging event: Unicast Ranging Received Abort Response - Re- initializing MAC
Logging event: Rng Rsp Abort Status - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x3e6
0x00012214 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:  (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc:  Releasing the lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc:  Sending Release packet; client id htype=1, value=00:14:a4:c4:7a:cc
0x00012228 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket:  (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x00012228 [DHCP Client Thread] BcmDhcpClientIf::SendRelease:  (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet!  Oh, well, no biggie...
0x00012228 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) Removing lease IP address 10.172.37.194 from IP stack 1
0x00012232 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00012232 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl:  (IP Stack1 HalIf)
Shutting down IP stack 1

CM>   DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00012322 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:  (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0001232c [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:  (Scan Downstream Thread) Downstream Channel scan stopped!
0x00012340 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:  (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 331000000
Scanning DS Channel at 331000000 Hz... (Initial target freq)

CM> 0x000125ac [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit:  (CmDocsisCtlThread) Locked on the downstream.  Waiting for UCDs...

******************************************
            DOWNSTREAM STATUS
******************************************
  Tuner Frequency = 331000000 Hz
   Carrier Offset = -7 Hz
      Symbol rate = 5360537 sym/sec
              SNR = 37 dB
         QAM Mode = QAM256
        Tuner AGC = 0xfff00000
           IF AGC = 0x12123418
      Power Level = 14 dB
              QAM = LOCKED
              FEC = LOCKED
******************************************


CM> Selecting UCD for Us Channel 2

0x000131be [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync:  (CmDocsisCtlThread) starting ds time sync acquisition...
0x00013434 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtlThread) downstream time sync acquired...
0x00013434 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit:  (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 40.0 dBmV
0x0001343e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control  for level 7 is 0.

CM>
RNG-RSP  Adj: tim=1548 power=0 freq=0  Stat=Continue

CM>
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Success

******************************************
            UPSTREAM STATUS
******************************************
       Upstream Status = UP
      Upstream Channel = 2
    Upstream Frequency = 29200000 Hz
        Upstream Power = 40 dBmV
           Ranging SID = 0x3e6
  Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc:  Waiting 1 seconds before sending Discover; client id htype=1, value=00:14:a4:c4:7a:cc
Not logging event ID 2307948624, control  for level 7 is 0.

CM> DHCPc:  Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc

CM> DHCPc:  Timed out waiting for offers for lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc:  No valid offers to select; need to send discover again.
Logging event: DHCP FAILED - Discover sent, no offer received

CM> DHCPc:  Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc

CM> DHCPc:  Timed out waiting for offers for lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc:  No valid offers to select; need to send discover again.
Logging event: DHCP FAILED - Discover sent, no offer received

CM> DHCPc:  Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc

CM>