data receive LED blinking on ecp2100

[hao]

ouch.........

i tried to using differ f/ware
previously(old) running on haxorware11rev39

since the epc has bmc3349 then i tried to run 250hack_dump_telnet.bin
(SB5101.firmware.upgrade.tutorial.by.FERCSA)

after upload completed reboot

ouch... only data receive led blinking
(LED LAN and Power: on; ok)

ping to the modem still valid
C:\ping 192.168.100

Pinging 192.168.100.1 with 32 bytes of data:

Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63

Ping statistics for 192.168.100.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 1ms, Average = 1ms

using WebAccess to the web interface seem right but its say error like "the page contain error message"
(Web interface login: Infinite password: SetValue)

any help?.... to debrick using pxe boot/ install

ouch......................