Accidently Write/CFI Flash Using Haxorware

[Cindy]

i think i have finally found the problem of why my modems got bricked the problem is i tried to use toms jtag on 4 modems and the minuet it started to write data to the modem all the lights went out and then i got nothing but cant verify ever block

how ever if i use the usb jtag everything goes just fine

with the usb jtag
i have noticed that the lights on the modem should stay on while flashing
and wait until the modem has compleatly booted before starting the flash
if the lights go out while flashing you have problems

i think that maby somebody isn't connecting the right pins to the right points on the plugs i purchased my printer port jtag cable on ebay

when all the lights go out there is nothing on this planet that will fix it i have spent months on the internet trying every posable debricking method and have pretty much come to the conclusion that if the power light doesn't come on the modem it is toast

i realy suggest that everybody trash you serial cables because unless you have successfully flashed a modem the cable is probably bad and will destroy your modem

and if you are reading this thread then that is exactly what has happend to you