07-04-2009, 11:38 PM
Hey guys does anyone have any information regarding whats going on with Virmin in the UK ? all the modems are being hit and its driving me nuts.
here is a log I managed to obtain in the 5 seconds between shoing operational and going into constant ranging:
earing in mind -
Area = Belfast, UK
BPI = disabled
modem MAC = brand new, untested, presumed workng
NIC MAC = brand new, untested, presumed wprking
config = unforced
modem = Motorola SB5101
firmware - Haxorware 1.1 rev30
here is a log I managed to obtain in the 5 seconds between shoing operational and going into constant ranging:
earing in mind -
Area = Belfast, UK
BPI = disabled
modem MAC = brand new, untested, presumed workng
NIC MAC = brand new, untested, presumed wprking
config = unforced
modem = Motorola SB5101
firmware - Haxorware 1.1 rev30
Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.04.07 22:33:13 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon
Username: root
Password: *****
Welcome.
CM>
CM> 0x00012142 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RngRspMsgEvent: (CmDocsisCtlThread) Received a RNG-RSP with ABORT! Going elsewhere...
0x0001214c [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 7 (kRngRspAbortStatus)
0x0001214c [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 7 (kRngRspAbortStatus)
BcmCmDocsisStatusEventCodes::kCmIsNotOperational
0x0001214c [CmDocsisCtlThread] BcmVendorCmApplication::StartDhcpServer: (VendorExtension CmApp) Starting DHCP Server!
0x0001214c [IGMP Thread] BcmIgmpThread::Stopping Igmp Thread...: (IGMP Thread)
CamDeleteAddress: Deleted address from cam segment 0
Logging event: Unicast Ranging Received Abort Response - Re- initializing MAC
Logging event: Rng Rsp Abort Status - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x3e6
0x00012214 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc: Sending Release packet; client id htype=1, value=00:14:a4:c4:7a:cc
0x00012228 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x00012228 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x00012228 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.172.37.194 from IP stack 1
0x00012232 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00012232 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
CM> DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00012322 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0001232c [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00012340 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 331000000
Scanning DS Channel at 331000000 Hz... (Initial target freq)
CM> 0x000125ac [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 331000000 Hz
Carrier Offset = -7 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x12123418
Power Level = 14 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM> Selecting UCD for Us Channel 2
0x000131be [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x00013434 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x00013434 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 40.0 dBmV
0x0001343e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
CM>
RNG-RSP Adj: tim=1548 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 2
Upstream Frequency = 29200000 Hz
Upstream Power = 40 dBmV
Ranging SID = 0x3e6
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 1 seconds before sending Discover; client id htype=1, value=00:14:a4:c4:7a:cc
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc: No valid offers to select; need to send discover again.
Logging event: DHCP FAILED - Discover sent, no offer received
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc: No valid offers to select; need to send discover again.
Logging event: DHCP FAILED - Discover sent, no offer received
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc
CM>