If you telnet into a Dlink DCM-202 you'll see it has a "production" menu. Under this menu (which is password protected) it has a cert downloader in addition to the ability to change other modem parameters such as Mfg, software/hw version, and MAC address. I assume it would be possible to get this modem online?
Here's a thread with pictures and a copy of a flash dump I made: DCM-202_Thread
The question I have, How to proceed? I can put my subscribed modems info onto a haxor modem and d/l the nonvol (~32kB file). I can also copy the certs directly from a dump of my subscribed modem...However, the way the firmware is laid out on my sub modem is different than the Motorola (BCM3349) based modems so I'm not certain what and where to snip from the f/w dump. I know some general info about the layout such as
0x00000000 -- bootloader
0x00010000 -- first image
0x00100000 -- second image
0x001FA000 -- log
Anyway, attached below is a snip from the f/w of a junk modem (not my subscribed) that shows the layout of the "nonvol" It is the last 64kB of the 2MB image.
Here's a thread with pictures and a copy of a flash dump I made: DCM-202_Thread
The question I have, How to proceed? I can put my subscribed modems info onto a haxor modem and d/l the nonvol (~32kB file). I can also copy the certs directly from a dump of my subscribed modem...However, the way the firmware is laid out on my sub modem is different than the Motorola (BCM3349) based modems so I'm not certain what and where to snip from the f/w dump. I know some general info about the layout such as
0x00000000 -- bootloader
0x00010000 -- first image
0x00100000 -- second image
0x001FA000 -- log
Anyway, attached below is a snip from the f/w of a junk modem (not my subscribed) that shows the layout of the "nonvol" It is the last 64kB of the 2MB image.
DO NOT CLICK ON THE SMILEY!! ~~> ![[Image: tongue.gif]](http://www.haxorware.com/forums/images/smilies/tongue.gif)
<~~
![[Image: tongue.gif]](http://i302.photobucket.com/albums/nn87/acmelectronics/kaboom.gif)
<~~