31-10-2011, 09:46 AM
Instruction how to connect Jtag SB5101U.
1. Connect ONLY Jtag to SO-8
2. Open BlackCatUsb.exe (makesure its on SPI mode Ver 1.09)
3. Plugin MODEM adapter (NOT the External adapter) then unglug it.
Note: if all the lights on the Modem remains ON after unplugin, this means your jtag connected propertly.
4. Connect or Switch ON Q104 as it shown in diagram.
Note: All the lights On the modem should go OFF.
5. Connect External Adapter as it shown in Diagram.
Note: Please DO NOT have the external 5V connected too long it can harm your Modem after 1 hour of full connecte.
6. Simply Press Detect on the BlackCatUSB.exe
If You guys have any questions, please PM me
Happy Testing
1. Connect ONLY Jtag to SO-8
2. Open BlackCatUsb.exe (makesure its on SPI mode Ver 1.09)
3. Plugin MODEM adapter (NOT the External adapter) then unglug it.
Note: if all the lights on the Modem remains ON after unplugin, this means your jtag connected propertly.
4. Connect or Switch ON Q104 as it shown in diagram.
Note: All the lights On the modem should go OFF.
5. Connect External Adapter as it shown in Diagram.
Note: Please DO NOT have the external 5V connected too long it can harm your Modem after 1 hour of full connecte.
6. Simply Press Detect on the BlackCatUSB.exe
If You guys have any questions, please PM me
Happy Testing