Did a bit more reversing today and worked out how to add custom commands to the cli menu. They have a plugin system which dynamically loads shared libraries to add menus and their commands.
Once you know the structure it's fairly trivial. Just added a custom 'pwnmenu' to run system level commands. I'll probably make a post at some point summarising everything and detailing this further as I have access to pretty much everything at this point.
![[Image: DX4TlSC.png]](https://i.imgur.com/DX4TlSC.png)
Also, a list of most of the commands available from the cli
Once you know the structure it's fairly trivial. Just added a custom 'pwnmenu' to run system level commands. I'll probably make a post at some point summarising everything and detailing this further as I have access to pretty much everything at this point.
Also, a list of most of the commands available from the cli
Code:
system - Go to system Menu.
startup - Go to Startup Sub-menu.
enable - Enable auto start, execute the startup script.
disable - Disable auto start, jump to command line.
filename - Setup startup script filename <startup script>.
docsis - Enable/Disable DOCSIS <Bool - on/off>.
default - Setup default startup script filename and enable auto start.
show - Show current settings.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
nvram - Go to NVRAM Sub-menu.
show - List database of a module in a component [component module].
remove - Remove a database of a module in a component [component module].
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
environment - Go to Environment variables Sub-menu.
printenv - Print environment variables.
setenv - Set an environment variable value [variable value].
hexgetenv - Get an environment variable value in hex format [variable].
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
pp - Go to Packet Processor Sub-menu.
brief - Show global, vpids and sessions summary.
devs - Show counters by network devices.
disable - Disable packet processor.
enable - Enable packet processor.
flush - Flush all sessions.
global - Show global statistics.
mapper - <number of sessions [1..2048(all)]> Show connection tracking mapping.
nopsm - Take C/Q/M-PDSPs out of Power Save mode.
noqos - Disable QoS processing scheme (Debug purpoces only).
pids - Show pids.
psm - Put C/Q/M-PDSPs into Power Save mode.
qos - Enable QoS processing scheme (Debug purpoces only).
qosDiscardOOO - <[0=ForwardOOO,1=DiscardOOO(default)]> Qos Discard out of order.
resetStats - Reset the HIL Analysis stats.
resetTimeout - Reset the session timeout to default.
session - <"all"> - Shows all active sessions
<"wan2lan"> - Shows all WAN-->LAN active sessions
<"lan2wan"> - Shows all LAN-->WAN active sessions
<"lan2lan"> - Shows all LAN-->LAN active sessions
<"mac"> <"da","sa","all"> <MAC Adress> - Shows all sessions matching to MAC SA/DA/both
<"ipv4"> <"src","dst","all"> <IP> - Shows all sessions matching to IPv4 SRC/DST/both
<"ipv6"> <"src","dst","all"> <IP> - Shows all sessions matching to IPv6 SRC/DST/both
<"tcp"> - Shows all TCP active sessions
<"udp"> - Shows all UDP active sessions
<"dslite"> - Shows all Ds-Lite active sessions
<"gre"> - Shows all GRE active sessions
<"drop"> - Shows all drop sessions.
setDsLiteUsFragIPv4 - <DS-Lite US frag method[0=IPv6(default),1=IPv4]> Set the SD-Lite Fragment method.
setClstMaxCreditByte - <clusterId> <maxCredit> Set the cluster max Byte Global Credit.
setClstMaxCreditPkt - <clusterId> <maxCredit> Set the cluster max Pkt Global Credit.
setQueueItCreditByte - <queueId> <itCredit> Set the queue Iteration Byte Credit.
setQueueItCreditPkt - <queueId> <itCredit> Set the queue Iteration Pkt Credit.
setQueueMaxCreditByte - <queueId> <maxCredit> Set the queue max Byte Credit.
setQueueMaxCreditPkt - <queueId> <maxCredit> Set the queue max Pkt Credit.
setReassDbTimeout - <[2..254]=Timeout in mSEC , 255=Disable timeout> Set the Reassembly DB timeout.
setSesTimeout - <Sec> Set the session timeout.
stats - Show HIL Analysis report.
tdoxAckSupprDis - <[0=Enable(default),1=Disable]> TDOX ACK suppression.
tdoxDbg - <[0=Disable,1=Enable]> TDOX debug.
tdoxDis - Disable TDOX feature.
tdoxEn - Enable TDOX feature.
tdoxEvalAvgPktSize - <Bytes> Set the TDOX Evaluation packet size threshold.
tdoxEvalPPS - <PPS> Set the TDOX Evaluation packets per second threshold.
tdoxEvalTime - <Sec> Set the TDOX Evaluation time.
test - Go to test Menu.
createSession - create the session.
printDsPktEgress - print dsPktDataEngress.
printDsPktIngress - print dsPktDataIngress.
printUsPktEgress - print usPktDataEngress.
printUsPktIngress - print usPktDataIngress.
setDsPktEgress - <pkt AA:BB:CC..> <length> set dsPktDataEgress.
setDsPktIngress - <pkt AA:BB:CC..> <length> set dsPktDataIngress.
setUsPktEgress - <pkt AA:BB:CC..> <length> set usPktDataEgress.
setUsPktIngress - <pkt AA:BB:CC..> <length> set usPktDataIngress.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
version - Show Firmware version.
vpids - Show counters by vpids.
vpidEgressList - <vpid Id> Show egress handles list for specific VPID.
vpidIngressList - <vpid Id> Show ingress handles list for specific VPID.
vpidTcpList - <vpid Id> Show tcp handles list for specific VPID.
vpidTdoxList - <vpid Id> Show tdox handles list for specific VPID.
xQC - <cluster Id> Show QoS Cluster extended data.
xQQ - <queue Id> Show QoS Queue extended data.
xSession - <session Id> Show sessions extended data.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
sme - Go to State Machine Engine Sub-menu.
list - List all top-level state machines.
lshort - List all state machines [filters].
llong - List all state machines with state path [filters].
SetModule - Set the LOG module (SM name (partial), Module index, [Component index]).
SetSeverity - Set the LOG Severity (SM name (partial), Severity index).
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
l2switch - Go to L2Switch Sub-menu.
disableForwarding - Stops all traffic in l2switch..
enableForwarding - Starts traffic in l2switch..
disablePort - Stop Rx and Tx on a port.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
enablePort - Starts Rx and Tx on a port.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
setPortMode - Sets MAC gasket mode for a port. Full Duplex is alwyas assumed.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM)
Mode(0-7): 0 = MII at 10Mbps, 1 = MII at 100 Mbps, 2 = RMII at 10 Mbps,
3 = RMII at 100 Mbps, 4 = GMII at 1000 Mbps, 5 = RGMII at 100Mbps,
6 = RGMII at 1000Mbps,7 = RGMII at 10Mbps..
getPortStats - Get statistic counters for a port.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
getProxyStats - PrxPDSP statistics.
enableTaggingOnPort - Mark port as tagged.Tagged ports expect to receive tagged frames.
Untagged frames will be assigned to port's Native Vlan.
Tagged port always transmits tagged frames.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
disableTaggingOnPort - Mark port as untagged.Untagged expect to receive untagged frames.
Ttagged frames will be discarded.
Untagged port always transmits tagged frames.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
setPortNativeVlan - Set port Native Vlan.Untagged frames will be assigned to this Vlan.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
addPortToVlan - Adds tagged port to Vlan.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
removePortFromVlan - Removes tagged port from Vlan.
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
getVlans - Shows vlan configuration.
getMcastMacs - Show static and learned multicast MAC addresses in l2switch.
getMcastRouterPorts - Show static and learned multicast MAC addresses in l2switch.
getUcastMacs - Show static and learned multicast MAC addresses in l2switch.
addStaticMac - Add static MAC address to l2switch fwd table.
Params:
Ports bitmap: Bitmap value of relevant ports.
MACaddress: MAC address to add, format: XX-XX-XX-XX-XX-XX.
deleteStaticMac - Delete static MAC address from l2switch fwd table.
Params:
MACaddress: Static MAC address to delete,
format: XX-XX-XX-XX-XX-XX.
getConfig - Show current switch configuration..
getStartupConfig - Show startup switch configuration..
getLog - Get l2switch firmware log.
enableLog - Enable firmware logging.
disableLog - Disable firmware logging.
getMachineState - Get l2switch hardware state.
enableEgressLogPort - Enable logging of egressing packets on a port
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
disableEgressLogPort - Disable logging of egressing packets on a port
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
enableIngressLogPort - Enable logging of ingressing packets on a port
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
disableIngressLogPort - Disable logging of ingressing packets on a port
Params:
Port number(0-7): 0 = ATOM, 1 = MOCA, 2 = RGMII0, 3 = RGMII1,
5 = UDMA0, 6 = UDMA1, 7 = DOCSIS/ARM).
readMDIO - Perform MDIO read.
Params:
PhyAddr: PHY address on MDIO bus
RegAddr: Register address in PHY.
writeMDIO - Perform MDIO write.
Params:
PhyAddr: PHY address on MDIO bus
RegAddr: Register address in PHY
Data: Value to write to register.
readCBUSRegister - Read CBUS register.
Params:
RegAddr: CBUS register address.
writeCBUSRegister - Write CBUS register.
Params:
RegAddr: CBUS register address
RegVal: Value to write.
disableIgmpSnooping - Disables IGMP/MLD snooping in l2switch..
enableIgmpSnooping - Enable IGMP/MLD snooping in l2switch..
dbgGetFwdData - .
dbgGetCam - .
extswitch - go to external switch Menu.
Init - Initialize External Switch - .
Shutdown - Shutdown External Switch - .
Stats - Display tx, rx numbers per port - .
addVlanToVtu - add vlan to VTU - <vlanid>.
chngPortDefVid - change the port default VID - <new default vlanid>, <eth Port(0-5)>.
deleteVlan - delete vlan from VTU - <vlanid>.
globRdReg - read glob regs - <Global device (0x1b - global 1 registers, 0x1c- global 2 registers)>, <regOffset(0-31)>.
globWrReg - write glob regs - <Global device (0x1b - global 1 registers, 0x1c- global 2 registers)>, <regOffset(0-31)>, <vlaue>.
getVtuInfo - get vlan info from VTU - <vlanid>.
initExtSwich - init extern switch to 802.1q modes - <802.1q igress mode (0-disable, 1-fallback 2-check 3-secure)>.
mapPortToVlan - map port to vlan - <vlanid>, <PortMemberTag (0-untouched, 1-untag 2-tag 3-discard)>, <eth Port(0-internal .. 4)>.
removePortFromVlan - unmap port from vlan - <vlanid>, <eth Port(0-5)>.
portEnable - read port params - <eth Port(0-internal .. 4)>, <Dis/En (0/1)>.
portRdReg - read port regs - <eth Port(0-internal .. 7)>, <regOffset(0-31)>.
portWrReg - write port regs - <eth Port(0-internal .. 7)>, <regOffset(0-31)>, <value>.
rdAllPortsParams - read all ports parameters - .
resetSwitch - reset the switch configuration - .
QinQ_NutralPort - set port to be a non Q in Q - <eth Port(0-internal .. 4)>.
QinQ_Port - set port to be a Q in Q - <eth Port(0-internal .. 4)>, <Q in Q tag type>, <Q in Q vlanid>.
show - Show external switch configuration.
initDB - init external switch restore DB.
restoreSwitch - restore switch configuration from DB.
StatisticsPerPort - counter statistics per port- <eth Port(0-internal .. 4)>.
macAddressTable - macAddressTable.
resetCountersPerPort - reset counters per port<eth Port(0-internal .. 4)>.
resetCountersPerAllPorts - reset counters for all ports.
phyPortEnable - enable PHY - <eth Port(0-internal .. 4)>, <Dis/En (0/1)>.
searchMac - search mac address - MACaddress.
addMac - add mac address - MACaddress, <eth Port(0-internal .. 4)>, <Dynamic/Static (0/1)>.
delMac - del mac address - MACaddress, <eth Port(0-internal .. 4)>.
loopDetectEnable - enable loop detect function - <Dis/En (0/1)>.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
arm11_atom_mbx - Go to Arm11-Atom Mail box Sub-menu.
sendEvent - event ID <0x1-0xc0>.
sendRpcIfEvent - <APP-CPU IP addr> <NP-CPU IP addr> <Network mask> <VLAN ID>.
receiveAck - event ID <0x1-0xc0> .
sendAck - event ID <0x1-0xc0> .
receiveEvent - event ID <0x1-0xc0> isParamRequiered <0-1> Parameter< 4 bytes> .
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
mmc - Go to MMC Controller box Sub-menu.
show - Display settings.
setcontroller - <369DB|PS7000|PS8211>, Set MMC controller type.
imageversion - Print F/W version in file system.
fwversion - Print eMMC Controller F/W version.
autoupgrade - <enable|disable>, Enable/Disable auto upgrade on system boot.
upgrade - Perform eMMC Controller F/W upgrade.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
psm - Go to PSM sub menu.
power - Simulate power <on/off>.
showMask - Show power control mask.
setMask - Set power control mask <mask | ALL | ALWAYS> <1/0 | 0x*** | 1/0>.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
lpcm - Go to LPCM sub menu.
enable - Enable low power consumption feature - reset is required..
disable - Disable low power consumption feature - reset is required..
forced - Forced low power consumption when CMTS not support EM feature..
unforced - Unforced low power consumption when CMTS not support EM feature..
narrowenable - Enable narrow scanning mode..
narrowdisable - Disable narrow scanning mode, halt and resume wide scanning.
widetimerset - Set a timer for wide scanning (in seconds).
widetimerget - Get a timer for wide scanning (in seconds).
widetimerenable - Enable wide scanning timer.
widetimerdisable - Disable wide scanning timer.
halttimerset - Set a timer for halt scanning (in seconds).
halttimerget - Get a timer for halt scanning (in seconds).
resumetimerset - Set a timer for resume scanning (in seconds).
resumetimerget - Get a timer for resume scanning (in seconds).
show details - Display all LPCM details.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
network - Dump networking related information.
memory - Dump memory related information.
timers - List all GPTimer requests in the system.
gimdb - dump the Gim Database on the screen.
netrxReduce - Reduce net-rx task priority.
netrxRestore - Restore net-rx task priority.
ipPrint - Print IP addresses used in the system.
link - Generate LinkUp/Down events : {wlan | moca} {up | down}.
ProductionSystem - Go to Production Sub-menu.
prodset - Set production params.
prodshow - Show production parameters.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
voice - Go to Voice Menu.
logger - Go to Logger Menu.
ComponentConfig - set/unset a component (component_id, 1/0).
AllComponentsConfig - set/unset all components (1/0).
ModuleConfig - set/unset a module (component_id, module_id, 1/0).
AllModulesConfig - set/unset all modules (component_id, 1/0).
SeverityConfig - set/unset a severity level (severity_level, 1/0).
AllSeveritiesConfig - set/unset all severity levels (1/0).
SocketConfig - Set the socket of the Logger UDP target (ip_address, port).
FilenameConfig - Set the filename for the file target (/dev/pts/0 for telnet).
QueueLimitConfig - Set the message queue limits (Message limit, Bytes limit) (0=Unlimited, -1=Default).
DebugModulesConfig - Enable/disable debug output of a module (component_id, module_id, 1/0).
AllDebugModulesConfig - Enable/disable debug output of all modules (component_id, 1/0).
TimeDisplay - Set/unset time display (1/0).
ComponentDisplay - Set/unset component display (1/0).
ModuleDisplay - Set/unset module display (1/0).
FullDisplay - Set full display.
DefaultDisplay - Set default display.
ShortDisplay - Set short display.
UserDisplay - Save/Restore user defined display (1/0).
TargetConfig - Set/unset output target (target_id, 1/0).
componentsList - Show components list and indicates set/unset for each.
modulesList - Show moudles list for a given component (component_id), and indicates set/unset for each.
severitiesList - Show severities list and indicates set/unset for each.
displayConfigList - Show display config list and indicates set/unset for each.
targetsList - Show targets list and indicates set/unset for each.
socketShow - Show the socket of the Logger udp target.
filenameShow - Show the filaname for file target.
queueLimitShow - Show the Logger queue limit.
setDefaults - Set Logger's Configuration default valus.
list - Show all components and their modules.
info - Show all logger information (severities, targets, queue...).
enable - Enable logger output.
disable - Disable logger output.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
eventm - Go to Event Manager Menu.
SendEvent - Send an event through the system (cm/mta, event_number, vendor, must_text, vendor_text).
SendStdTrap - Send a standard trap through the system (cm/mta, sub_type, if_id, admin_status, oper_status).
ResetLog - Reset the Event Manager's Log (cm/mta).
DefaultEventTables - Set the Event Manager tables to default (cm/mta).
SetEventLevel - Set new level for an event (cm/mta, event_id, new_evel).
SetEventMask - Set new mask for an event (cm/mta, event_id, new_mask).
SetEventText - Set new text for an event (cm/mta, event_id, new_text).
SetPriorityMask - Set new mask for a priority (cm/mta, priority, new_mask).
GetEventsList - Gets and prints the events list (cm/mta, vendor_events(1/0)).
SetThrotAdmin - Set the throttling admin status (cm/mta, 1-Unconstrained/2-Throt below threshold/3-Throt stop at threshold/4-Inhibited).
SetThrotThresh - Set the throttling threshold (cm/mta, threshold).
SetThrotInterval - Set the throttling interval (cm/mta, interval).
GetThrotParams - Get the throttling parameters (cm/mta).
StartSyslog - Start the Syslog service (cm/mta, ipVer: 0-V4/1-V6, IP address).
StopSyslog - Stop the Syslog service (cm/mta).
GetSyslogServer - Get the Syslog server (cm/mta).
StartSNMP - Start the SNMP service (cm/mta).
StopSNMP - Stop the SNMP service (cm/mta).
ExitManager - Stop and exit from the event manager (cm/mta).
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
version - prints system version.
pacm - Go to PACM Menu.
version - prints PACM version.
options - prints PACM compilation options.
provisioning - go to Provisioning Menu.
provDebug - go to Provision Debug Sub-Menu.
display_SME_EventsTable - Display the SME events table.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
dhcpServersConfig - Set IPv4 addresses of primary and secondary DHCP servers (dotted notation)
dhcpServersConfig <primary> <secondary>.
sendCMLinkUpEvent - sending CM link up event for starting MTA provisioning.
sendMSMStartEvent - sending MSM start event.
sendDHCPLeaseFailEvent - sending DHCP Lease Fail event.
sendDHCPNewIPEvent - sending DHCP New IP event.
sendCMLinkDownEvent - sending CM Link Down event <is this T4>.
sendCMFullScanNoQam - sending CM Full scan no QAM.
sendCMQamRegained - sending CM QAM Regained.
sendCMResetEvent - sending CM Reset event.
sendMTAResetEvent - sending MTA Reset event.
sendVoiceRstDoneEvent - sending voice reset done event.
sendVoiceRstFailEvent - sending voice reset fail event.
sendSecRstDoneEvent - sending Sec Reset done event.
sendSecRstFailEvent - sending Sec Reset fail event.
configFile - Set configuration file URL: <server> <filename>,
<server> can't be NULL.
hashBypassSet - Set hash checking bypass.
provDBcontents - Print contents of provisioning DB.
setVoiceLoopVoltage - Changes the loop voltage state.
tftpAlwaysOn - Set permanent TFTP download status.
provStatus - print the MTA provisioning status.
provFlow - Get the MTA provisioning flow.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
security - go to Security Menu.
certificates - go to Certificates Sub-Menu.
getMtaCert - Get mta certfiles from server tftp <1 for Euro, 0 for NA> <cert> <key> <server ip> .
getAllCerts - Get all the certfiles from server tftp <1 for Euro, 0 for NA> <mtaCert> <mtaKey> <manufacturerCert> <rootCert> <server ip> .
certMtaSet - Set mta certfiles <1 for Euro, 0 for NA> <cert> <key> .
certManufSet - Set manuf certfile <1 for Euro, 0 for NA> <cert> .
certIpteleSet - Set iptel root certfile <1 for Euro, 0 for NA> <cert> .
resetCertsToDefault - Reset the certificates of manufacturer and iptel root to default (by nvram flag).
setCertRootType - Set iptel root certificate type <zone: (1)Euro, (0)NA> <root cert type: (1)TestRoot (2)RealRoot>.
displayCertsDir - Display Certs data.
displayCertContent - Display certificate content <zone: (1)Euro, (0)NA> <cert type: (1)MTA (2)Manufacture (3)Root>.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
resetTickets - Delete ticket from NVRAM <option> (1)PROV-SERVER (2)CMS (3)ALL.
overrideCmsTtl - Override the CMS TTL with this value <value in sec>.
timersDisplay - Display Security timers.
smDataDisplay - Display state machine data.
mtaDisplay - Display current MTA data.
displayDB - Print contents of security DB.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
vendorSubMenu - go to VendorSubMenu.
vendorSetDhcpServerAddr - Set the MTA primary DHCP Server Address <IP Address>.
vendorModifyDhcpAckParam - Modify parameters received in MTA DHCP ACK parameters:
<flow: 0-Basic 1-Hybrid 2-Secure>
<MTA24 - syslog 0-false 1-true>
<MTA25 - Inform 0-false 1-true>
<download config file 0-false 1-true>
<local config file name - string>
<syslog server IP>
<Realm name - string>.
vendorSetTftpData - Set the MTA TFTP server IP and configuration file name <TFTP IP Address> <file name>.
vendorAddSnmpTarget - Add a target for sending SNMP message (MTA25) <Server IP Address> <type>.
printVendorRegisteredEvents - print all vendor registered events.
VENDOR_STATUS_VENDOR_APP_set - Set status of vendor app <0-disable 1-enable>.
VENDOR_AFTER_MSM_INIT_set - Set status of VENDOR_AFTER_MSM_INIT message <0-disable 1-enable>.
VENDOR_SET_DHCP_SERVER_ADDR_set - Set status of VENDOR_SET_DHCP_SERVER_ADDR message <0-disable 1-auto, 2-manual>.
VENDOR_AFTER_DHCP_ACK_set - Set status of VENDOR_AFTER_DHCP_ACK message <0-disable 1-auto, 2-manual>.
VENDOR_SET_TFTP_DATA_set - Set status of VENDOR_SET_TFTP_DATA message <0-disable 1-auto, 2-manual>.
VENDOR_ADD_SNMP_TARGET_set - Set status of VENDOR_ADD_SNMP_TARGET message <0-disable 1-auto, 2-manual>.
VENDOR_BEFORE_MTA_RESET_set - Set status of VENDOR_BEFORE_MTA_RESET message <0-disable 1-enable>.
VENDOR_ENABLE_EVENTS_set - Set status of VENDOR_ENABLE_EVENTS message <0-disable 1-enable>.
VENDOR_ENABLE_DHCP_PLUG_IN_set - Set status of vendor DHCP plug in <0-disable 1-enable>.
VENDOR_ENABLE_CFM_PLUG_IN_set - Set status of vendor config file manager plug in <0-disable 1-enable>.
VENDOR_DISABLE_CFM_SPEC_TREE_set - determain spec tree status <0-active (default) 1-disabled>.
restore - Restore parameters to defalut.
save - Save all parameters to flash.
show - Print current settings.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
production - go to Production Menu.
prodSet - Set a parameter by index.
PACM_CONFIG_EURO_set - Operation mode US/Euro.
PACM_CONFIG_MTA_NUM_LINES_set - Number of lines.
PACM_CONFIG_IP_ADDR_set - Configure IP Address.
PACM_CONFIG_HW_ADDR_set - MTA network device H/W Address.
PACM_CONFIG_MTA_TELE_ID_set - MTA Slic Type.
PACM_CONFIG_MTA_BBU_set - MTA BBU Setting.
PACM_CONFIG_MTA_NUM_SLIC_set - Number of SLIC.
save - Save all parameters to flash.
show - Print current settings.
setDefaultMacAddress - Set the default MAC-Address to the MTA.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
dynamicConfig - go to Dynamic Configuraion Menu.
set - Set a parameter by index.
PACM_DYN_CONFIG_LOOPV_POLICY_set - Set loop voltage policy.
PACM_DYN_CONFIG_LOOPV_STATUS_set - Set loop voltage status.
PACM_DYN_CONFIG_LOOPV_RESET_TIMER_set - Set loop voltage reset timer value.
PACM_DYN_CONFIG_LOOPV_MAINT_TIMER_CD_set - Set loop voltage maint timer count down value.
PACM_DYN_CONFIG_SNMP_ENGIN_BOOT_NUM_set - Holds the number of SNMP engine reboots.
restore - Restore parameters to defalut.
save - Save all parameters to flash.
show - Print current settings.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
event - go to Event Menu.
sendEvent - Send an event <eventID> <vendorEvent>. vendorEvent: (0)False (1)True .
displayEventTable - Display the event table.
printLogFile - Print the log file to the screen in a formatted manner.
resetLogFile - Reset the log file.
deleteLogFile - Delete the log file.
resetTables - Reset Tables.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
debugMenu - go to debugMenu.
debugSet - Set a parameter by index.
PACM_CONFIG_TICKETS_FLASH_SUPPORT_set - Tickets support.
PACM_CONFIG_PROV_DHCP_RETRIES_set - DHCP Retries during provisioning.
PACM_CONFIG_IPSEC_ENABLE_set - Enable/Disable IPSEC on board ('False' overrides conf file).
PACM_CONFIG_PROVISION_FLOWS_SUPPORT_set - Provision flows: bit mask of 0x1=sec; 0x2=hybrid; 0x4=basic.
PACM_CONFIG_CERTIFICATION_MODE_set - Enable/Disable Certification mode.
PACM_CONFIG_SNMPV2_ACCESS_set - Enable MTA SNMPv2 access.
PACM_CONFIG_TLV38_SNMPV1_ENABLE_set - Enable MTA TLV38 SNMPv1 Trap send.
PACM_CONFIG_CFM_FILE_HASH_BYPASS_set - Enable config file hash checking bypass.
PACM_CONFIG_MAS_ROUTE_TO_LOGGER_set - Should MAS Spy messages be routed to logger.
ARRIS_PROVISIONING_set - Arris provisioning type BASIC1=0, BASIC2=1, HYBRID1=2, HYBRID2=3, SECURE=4, GUPI=5, MINUS_KDC=6.
PACM_CONFIG_EURO_HASH_SIZE_20_set - Enable Euro Hash of size 20.
PACM_CONFIG_MTA_RESET_WATCH_DOG_set - Enable MTA reset when voice do not answer on cleanup.
PACM_CONFIG_SEND_CONN_ERROR_EVENT_set - Enable/Disable sending Connection Error event.
PACM_CONFIG_LOG_PRIORETY_ALGORITHM_set - Enable/Disable writing to local log according to priorety.
restore - Restore parameters to defalut.
save - Save all parameters to flash.
show - Print current settings.
voicePortsSet - Set voice ports (ports...).
voicePortsGet - Print voice ports to the console.
voiceDropPortsSet - Set voice drop ports <src> <dst>.
voiceDropPortsGet - Print voice drop ports to the console.
dhcpActive - Set DHCP status <1-active, 0-not active>.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
managerMenu - go to managerMenu.
PACM_MANAGER_TOD_DELAY_SEC_PROV_set - Set TOD feature status.
PACM_MANAGER_HITLESS_SOFTWARE_DOWNLOAD_set - Set hitless software download feature status.
PACM_MANAGER_HITLESS_DHCP_set - Set hitless DHCP feature status.
PACM_MANAGER_RANDOM_USM_SPIN_LOCK_set - Set random usm spin lock feature status.
PACM_MANAGER_VENDOR_COMMUNITY_NAME_set - Set specific vendor community name feature status.
PACM_MANAGER_VENDOR_CMS_AS_IP_set - Set Enable using CMS as IP flag..
PACM_MANAGER_VENDOR_ENABLE_EVENTS_set - Set status of VENDOR_ENABLE_EVENTS message <0-disable 1-enable>.
PACM_MANAGER_VOICE_SLIC_PSM_STATUS_set - Set status of Voice PSM features <0-disable 1-enable>.
PACM_MANAGER_VOICE_DECT_IF_set - Set DECT interface <0-disable 1-enable>.
PACM_MANAGER_VOICE_VLM_IF_set - Set Enable VLM interfaces <0-disable 1-enable>.
PACM_MANAGER_SNMP_RESTRICT_CONFIG_VIEW_set - Restrict @mtaconfig view acoording to supported zone.
PACM_MANAGER_VOICE_SLIC_WB_STATUS_set - Set status of Voice SLIC WB features <0-disable 1-enable>.
PACM_MANAGER_BBU_ISR_MASK_set - BBU interrupt configuration.
PACM_MANAGER_VOICE_PP_SUPPORT_set - Set Voice PP Support <0-disable 1-enable>.
PACM_MANAGER_VOICE_DECT_RST_CTS_SUPPORT_set - Set DECT RTS CTS Support <0-disable 1-enable>.
restore - Restore parameters to defalut.
save - Save all parameters to flash.
show - Print current settings.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.
help - Display menu commands.
shortcuts - Display key shortcuts help.
exit - Exit this sub-menu, go to previous menu.
quit - Quit and terminate CLI.
reboot - Reboot the system.