31-08-2017, 05:02 PM
(31-08-2017, 04:42 AM)christianrodher Wrote: Input is doing gibberish and random characters... anyone encounter this before and fix it?
serial console logs:
Code:NPCPU Only Mode = 0
Cat Mountain D0 - Boot Ram.
Version: 0.1.16 (Apr 10 2014, 18:52:35)
Boot Param memory dump:
[0x1FFC] - 0x00010016
[0x1FF8] - 0x00000001
[0x1FF4] - 0x00000001
[0x1FF0] - 0x00000001
[0x1FEC] - 0x00000001
[0x1FE8] - 0x08000000
[0x1FE4] - 0x08000000
[0x1FE0] - 0x00200000
[0x1FDC] - 0x00220000
[0x1FD8] - 0x00240000
[0x1FD4] - 0x00040000
[0x1FD0] - 0x00280000
[0x1FCC] - 0x00280000
[0x1FC8] - 0x00020000
[0x1FC4] - 0x00000000
[0x1FC0] - 0x00000000
[0x1FBC] - 0x00000000
[0x1FB8] - 0x00000000
[0x1FB4] - 0x00000000
[0x1FB0] - 0x00000000
[0x1FAC] - 0x00000000
[0x1FA8] - 0x00000000
[0x1FA4] - 0x00000000
[0x1FA0] - 0x00000000
[0x1F9C] - 0x06050201
[0x1F98] - 0x09030807
[0x1F94] - 0x0E0D0C0A
[0x1F90] - 0x00000001
[0x1F8C] - 0x0000000C
[0x1F88] - 0x00030111
[0x1F84] - 0x00201000
[0x1F80] - 0x00000070
[0x1F7C] - 0x00221000
[0x1F78] - 0x00008000
[0x1F74] - 0x00000020
[0x1F70] - 0x00180000
[0x1F6C] - 0x00010000
[0x1F68] - 0x00190000
[0x1F64] - 0x00009400
[0x1F60] - 0x00199400
[0x1F5C] - 0x00065400
[0x1F58] - 0x001FF000
[0x1F54] - 0x00000800
[0x1F50] - 0x001FF800
[0x1F4C] - 0x00000800
[0x1F48] - 0x001FE800
[0x1F44] - 0x00000800
[0x1F40] - 0x00000001
[0x1F3C] - 0x00000000
[0x1F38] - 0x00010000
[0x1F34] - 0x00000000
[0x1F30] - 0x00000000
[0x1F2C] - 0x00000000
[0x1F28] - 0x00000000
[0x1F24] - 0x00000000
Load U-Boot from eMMC/NAND Flash
eMMC/NAND copy from 0x00240000 to 0x49FB0000 (len:262144).
Done.
U-Boot 1.2.0 (Dec 24 2015 - 08:28:48)
PSPU-Boot 2.2.0.45
DRAM: 128 MB
Flash: 0 kB
MMC: sdhci_puma6: 0
MMC info:
Manufacturer ID: 0
OEM ID: 0
Name: MMC128
MMC version 4.4
High Capacity: No
Dual Data Rate (DDR): No
Bus Width: 8-bit
Clock: 50000000
Rd Block Len: 512
Capacity: 112.4 MB (117833728 bytes)
In: serial
Out: serial
Err: serial
WARNING: BOOTPARAMS_AUTOUPDATE is equal to 'off', u-boot do not update Boot Parameters automatically.
Board-Type: harborpark
AEP: Disable
Boot Device: mmc
ACTIMAGE: 1
Press SPACE to abort autoboot in 2 second(s)
=> <INTERRUPT>
=> lkJsFsFlaOkJj%daOsFd <INTERRUPT>
=>
It may not serve much, but did you check the connection status to the GND point? It has a uboot version of 2015, relatively modern bone and possibly hood.