Some problem with Flash SB5101i over Serial Cable

[drewmerc]

Part. 1 Select option "d" to download a firmware image into the flash. 2 more prompts will then appear, enter your settings accordingly.



Part 2. After entering this information the modem will download your firmware image into the flash, and will ask you where to store the image, select option 1, then select yes when asked if you want to store an uncompressed image.



After storing the image, you will be asked if you want to store parameters to flash. Select no, and your upgrade will be complete.

ripped from the weeby tut here but shits the same http://www.theoryshare.com/cable-modem-m...sole-cable