Please do the flash backups correctly, for these purposes do the following:
1. Open USBJTAG NT.
2. Select Tools / Settings.
3. Select Develop / SPIFLASH / 25128.
4. Back up each flash using the same procedure.
If the backups are not done correctly it is difficult to perform an xml with precision, one way to detect the sectors and their corresponding sizes is through the Boot Log made by serial cable (console), an example of the information that has to appear:
Partitions [0] = {.name = U-Boot, .offset = 0x00000000, .size = 0x00020000 (128K)}
PD: It may not be possible for UBFI2 to find one part in Flash 1 and another part in Flash 2, the readings of both flashes are not done correctly, follow the steps outlined above.
1. Open USBJTAG NT.
2. Select Tools / Settings.
3. Select Develop / SPIFLASH / 25128.
4. Back up each flash using the same procedure.
If the backups are not done correctly it is difficult to perform an xml with precision, one way to detect the sectors and their corresponding sizes is through the Boot Log made by serial cable (console), an example of the information that has to appear:
Partitions [0] = {.name = U-Boot, .offset = 0x00000000, .size = 0x00020000 (128K)}
PD: It may not be possible for UBFI2 to find one part in Flash 1 and another part in Flash 2, the readings of both flashes are not done correctly, follow the steps outlined above.