26-07-2015, 07:40 AM
(26-07-2015, 07:24 AM)drewmerc Wrote: flash the diag version of hax, your posting telnet logs from the lite version and its missing all the relevant info needed
Ups, totally my mistake, First, Thanks for Reply Drewmerc, yes i did that allready and here is the new log, BTW i took some forward steps, MR. Ziricom pointed me on the right track (Thanks ALOT Mate!) and here is my new status regarding config files*, on tftp server i get this error:
"Error:RecvFrom Returns 10040 <"A message sent on a datagram socket was larger than
the internal message buffer or some other network limit, or the buffer used to
receive a datagram into was smaller than the datagram itself."
Any ideas of how to resolve that? is like a damn brick wall, i increased my MTU size on my ethernet card, but i dont think is on my Server side cuz i can "get" and "put" files on server using a Client no problems at all,
///////////TELNET LOG DIAG////////////////////
Haxorware integrated telnet daemon
Username: root
Password: *****
Welcome.
CM>
CM> run
CM>
CM> run_app
Running the system...
Beginning Cable Modem operation...
CM> Deleting DOCSIS 1.0 CoS Settings for SID 0x1ea6
0x0007882a [CmDocsisCtlThread] BcmDocsisCmHalIf:
eleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...Stopping DHCP/ToD/TFTP (client requested)...
DHCPc: Releasing the lease with client id htype=1, value=00:22:ce:79:da:3f
0x0007882a [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.112.94.39 from IP stack 1
0x00078834 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00078834 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0007892e [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00078938 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00078942 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncStop: (CmDocsisCtlThread)
*
* Locking off-frequency so that we don't receive any
* messages or data. Ignore the scan messages that follow...
*
0x00078942 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)
0x00078942 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 99000000 Hz, QAM256
Found energy at frequency 99000000Hz! Publishing event kEventEnergyDetected...
Attempting Downstream FEC lock @ freq= 105000000 Hz, QAM256
CM> Attempting Downstream FEC lock @ freq= 111000000 Hz, QAM256
0x00078d98 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread)
CM did not lock to target ds freq. Non-zero target us chan id
no longer applies. Setting target us to 0.
0x00078d98 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 111000000 Hz
Carrier Offset = 1 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1549a7ae
Power Level = 0 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM> Selecting UCD for Us Channel 3
0x0007a436 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x0007a6ca [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x0007a6ca [CmDocsisCtlThread] BcmCmDocsisCtlThread:
sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
0x0007a6ca [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)
CM>
RNG-RSP Adj: tim=2446 power=46 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 37000000 Hz
Upstream Power = 45 dBmV
Ranging SID = 0x1ea6
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 2 seconds before sending Discover; client id htype=1, value=00:22:ce:79:da:3f
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:22:ce:79:da:3f
DHCPc: Received an Offer from DHCP server 50:57:a8:89:bc:d9 (10.112.0.1); lease client id htype=1, value=00:22:ce:79:da:3f
Instance: IP Stack1 (0x806a109c)
Releasing lease for client id htype=1, value=00:22:ce:79:da:3f
DHCPc: Releasing the lease with client id htype=1, value=00:22:ce:79:da:3f
0x0007c132 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.112.111.143 from IP stack 1
0x0007c132 [DHCP Client Thread] BcmEcosIpHalIf:
eleteRoute: (IP Stack1 HalIf) ERROR - SIOCDELRT: errno=3 bcm0'!0x0007c132 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) ERROR - DeleteRoute failed for interface:bcm0'!
Instance: IP Stack2 (0x8069f5ec)
Releasing lease for client id htype=1, value=00:22:ce:79:da:3f
CM/IpHal> ipconfig
CM/IpHal>
CM/IpHal> ipconfig 1 static 10.112.94.39 255.255.252.0 10.112.64.1
CM/IpHal> ipconfig 1 static 10.112.94.39 255.255.252.0 10.112.64.1
WARNING: This will be applied to all 2 registered instances!
Do you really want to do this? (yes|no) [no] y
Instance: IP Stack1 (0x806a109c)
Configuring static lease for IP Stack1...
Current IP address is default 0.0.0.0.
0x0007c240 [ConsoleThread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.112.94.39 (primary IP address)
Subnet Mask = 255.255.252.0
Router = 0.0.0.0
IsPrimaryInterface = 1
ARPing for default GW IP = 0.0.0.0
MAC = 00:00:00:00:00:00
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.112.94.39, Subnet=255.255.252.0, Gateway=0.0.0.0
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:22:ce:79:da:3f
State = Renewing (5)
Static Lease = 1
AutoConfig Mode = IP, Subnet and Router
XID = 0x1a8f4332
Number of Tries = 1
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:00:00:00:00:00
Ignore NAKs = 0
My offered IP address = 10.112.94.39 (primary IP address)
(1) Subnet Mask = 255.255.252.0
(3) Router IP address = 0.0.0.0
Alternate Router IP Addr = 10.112.64.1
(54) DHCP Server IP address = 0.0.0.0
(82) Relay Agent IP address = 0.0.0.0
TFTP Server IP address = 0.0.0.0
CM Configuration file = ''
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address =
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 0 seconds
(58) T1 (renew) = 0 seconds
(59) T2 (rebind) = 0 seconds
Lease is infinite = 0
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.112.94.39
Time server not specified!
Forcing Time Of Day to accept Jan 1, 1970...
Current system time -> Thu Jan 01 00:00:00 1970
System start time -> Wed Dec 31 23:51:32 1969
Starting Tftp of configuration file...
DHCP is enabled but FORCE the use of non-vol specified config file!...
Opening file '^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings' on 192.168.100.2 for reading...
SNMP Agent Binding to 10.112.94.39:225
tftp-enforce bypass is using 192.168.100.2:^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
Initiating fake TFTP Get (tftp-enforce bypass)
Not logging event ID 2291949724, control for level 7 is 0.
Instance: IP Stack2 (0x8069f5ec)
Configuring static lease for IP Stack1...
0x0007c2e0 [ConsoleThread] BcmDhcpClientIf::ConfigureStaticLease: (DHCP ClientIf for IP Stack1) ERROR - The lease is not in initial state! You must release the lease before trying to configure a static lease!
ERROR - failed to configure static lease!
CM/IpHal> cd
CM/IpHal>
CM/IpHal> cd /
CM/IpHal> cd /
Active Command Table: CM DOCSIS Commands (CM)
CM
CM> Bypass failed.Error Operation timed out
Forcing Config File name to ^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
BcmComputeDefaultGatewayIpAndMacAddr(): No arp target selected; host not reachable!
ether_output: No arp target selected; host not reachable!
0x0007d668 [CmDocsisIpThread] BcmEcosSocket::Sendto: ERROR - SOCKET_ERROR: 365
0x0007d668 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) ERROR - Sendto() failed to (192.168.100.2) on port (TFTP 69)
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) ERROR - Failed to open the file on the TFTP server!
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) WARNING - TFTP object returned unknown error 0. Treating as 'file not found'.
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Failed to read the config file, or it was rejected by the client!
0x0007d668 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Will try again later...(after 20 seconds).
0x0007d672 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) WARNING -
**
*
* Using non-DOCSIS compliant TFTP retry timeout value from nonvol!
* DOCSIS requires 600 seconds!
*
**
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Logging event: TFTP failed - configuration file NOT FOUND
Not logging event ID 2291949324, control for level 7 is 0.
CM> Starting Tftp of configuration file...
DHCP is enabled but FORCE the use of non-vol specified config file!...
Opening file '^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings' on 192.168.100.2 for reading...
tftp-enforce bypass is using 192.168.100.2:^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
Initiating fake TFTP Get (tftp-enforce bypass)
CM> Bypass failed.Error Operation timed out
Forcing Config File name to ^1-4A16C8A9-Inter.Resid.20Mbps-Moto-Common-Settings
BcmComputeDefaultGatewayIpAndMacAddr(): No arp target selected; host not reachable!
ether_output: No arp target selected; host not reachable!
0x00083824 [CmDocsisIpThread] BcmEcosSocket::Sendto: ERROR - SOCKET_ERROR: 365
0x00083824 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) ERROR - Sendto() failed to (192.168.100.2) on port (TFTP 69)
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) ERROR - Failed to open the file on the TFTP server!
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::TftpConfigFile: (CmDocsisIpThread) WARNING - TFTP object returned unknown error 0. Treating as 'file not found'.
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Failed to read the config file, or it was rejected by the client!
0x00083824 [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) ERROR - Will try again later...(after 20 seconds).
0x0008382e [CmDocsisIpThread] BcmCmDocsisIpThread::RestartTftpConfigFile: (CmDocsisIpThread) WARNING -
**
*
* Using non-DOCSIS compliant TFTP retry timeout value from nonvol!
* DOCSIS requires 600 seconds!
*
**
Logging event: TFTP failed - configuration file NOT FOUND
///////////////////////LOG ENDS////////////////////////////////////////