Netgear test thread

[Canis-Major]

On it right now

Starting LZMA Uncompression Algorithm.
Compressed file is LZMA format.
Linux version 2.6.18_pro500 (root@mv.ambit.com.tw) (gcc version 4.2.0 20070126 (prerelease) (MontaVista 4.2.0-2.0.0.custom 2007-02-12)) #1 PREEMPT Fri Feb 13 18:18:05 CST 2009
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff
Machine: puma5
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writethrough
Reserved 0k DSP memory starting from Physical 0x82000000
CPU0: D VIPT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Real-Time Preemption Support © 2004-2006 Ingo Molnar
Built 1 zonelists. Total pages: 8192
Kernel command line: root=/dev/mtdblock6 mtdparts=sfl0:0x20000(U-Boot)ro,0x10000(env1),0x10000(env2),0x3b0000@0x40000(UBFI1),0x3b0000@0x3f0000(UBFI2),0xc747c@0x3f0f84(Kernel),0x1f9400(RootFileSystem),0x50000@0x7b0000(nvram) console=ttyS0,115200n8 ethaddr0=00:01:02:03:04:05
WARNING: experimental RCU implementation.
Interrupt controller revision : 4e822100
PID hash table entries: 256 (order: 8, 1024 bytes)
Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905]
Initialized Peripheral Port Remap Register to base : 0x50000000
Puma5 Timer0 initialized
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 30040KB available (1836K code, 490K data, 76K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Off chip memory allocated: 153088
QMgr Init: buffer after alignment: 80340000
avalanche_ppd_init: PP system initialized successfully.
avalanche_ppd_init(496):return code 0x00
HIL Core: Profile intrusive has been Loaded.
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 3, 32768 bytes)
TCP bind hash table entries: 512 (order: 1, 14336 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered (default)
watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec
TI LED driver initialized [major=254]
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A
serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A
loop: loaded (max 8 devices)
Loading cpgmac driver for puma5
TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2
Cpmac: Installed 1 instances.
i2c /dev entries driver
Serial Flash [Bus:0 CS:0] : mx25l6405 8192KB, 128 sectors each 64KB
8 cmdlinepart partitions found on MTD device sfl0
partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
partitions[3] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) }
partitions[4] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) }
partitions[5] = {.name = Kernel, .offset = 0x003f0f84,.size = 0x000c747c (797K) }
partitions[6] = {.name = RootFileSystem, .offset = 0x004b8400,.size = 0x001f9400 (2021K) }
partitions[7] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) }
Creating 8 MTD partitions on "sfl0":
0x00000000-0x00020000 : "U-Boot"
0x00020000-0x00030000 : "env1"
0x00030000-0x00040000 : "env2"
0x00040000-0x003f0000 : "UBFI1"
0x003f0000-0x007a0000 : "UBFI2"
0x003f0f84-0x004b8400 : "Kernel"
mtd: partition "Kernel" doesn't start on an erase block boundary -- force read-only
0x004b8400-0x006b1800 : "RootFileSystem"
mtd: partition "RootFileSystem" doesn't start on an erase block boundary -- force read-only
0x007b0000-0x00800000 : "nvram"
Serial Flash [Bus:0 CS:1] : No device found
ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0)
ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0)
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 76K
docsis_mng: module license 'Texas Instruments' taints kernel.
Ingress Hook on eth0
Dbridge Init SUCSESS
Autoconfiguration disabled for br0
HAL_MacDsUnicastDataFilterAdd: system_rev = 1
Autoconfiguration disabled for lbr0
HAL_MacDsUnicastDataFilterAdd: system_rev = 1
Autoconfiguration disabled for lan0
Error: Unable to create VPID -1 PID -1 Device lbr0
HAL_MacDsUnicastDataFilterAdd: system_rev = 1
Autoconfiguration disabled for wan0
Autoconfiguration disabled for cni0
Autoconfiguration disabled for wan0
Autoconfiguration disabled for wan0
Autoconfiguration disabled for wan0

Error: Unable to create VPID -1 PID -1 Device lbr0 = hence no ethernet to pc.