Ambit vmng 300 + 300 v2

[Canis-Major]

Lol, well, c655 is still there, all that was changed is everything after this is cut out so to speak, probably to remove the after circuit containing the origionaly posted isp pin on the v1, but I have indeed solved the actual flashing problem on ubee's, and you heard it here first:

Connect external 5v power supply to pin two of spi chip, now here's the best bit, I used usb from pc, so only needed the + wire, ie red, due to usbjtag sharing same - as all other usb port's.

Connect usbjtagnt as per usual, forget isp pin, it is not needed as the programmer site says..

Last, but not least, is the fix:

Whilst usbjtag.com say do not plug in power when using 5v direct to pin 2 of spi, DO plug in power supply, but make sure the power SWITCH (of modem) is OFF!!!!!

Strange but true.

Another fix from the hardcore test zone

For the v1 of this modem, grab a 12v power supply, split the two wires, take the positive, and cut it, insert switch to make up for the switch missing from v1 modem.

Please note this is for the ambit vmng, v1, and v2..

Have a nice day.. now to learn puma shit.. where the fuck is that script?

Ps, why would the eth port be inactive?