What can I do with a SBG6580?

[Ziricom]

Sure you can....what firmware are you on currently?

SBG6580-6.5.2.0-GA-06-077-NOSH

ok so go download NET-SNMP and TFTPD32 install both unplug the coax from your modem go into your network settings set your IP settings as follows on your computer when it's plugged directly into the modem


IP Address: 192.168.100.10
Subnet Mask: 255.255.255.0
Default Gateway:192.168.100.1

then launch TFTPD32 and put the attached firmware file into the TFTP Directory and then run the bat script (also attatched) and the modem should take the firmware upgrade. Reboot and it should be good to go