Thompson/RCA DCM425C Flashing -- Linux snmp bash script

[pretje]

Hi.
I tried to install haxorware in my TCM420 using TFTP. Server is running under 192.168.100.10 and the bash script gives me response like this:

Code:

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1 s password
Press ENTER to continue...Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1

snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
Press ENTER to continue...iso.3.6.1.2.1.1.1.0 = STRING: "Thomson DOCSIS Cable Modem <<HW_REV: 4.0; VENDOR: Thomson; BOOTR: 2.1.6d; SW_REV: ST52.02.03; MODEL: TCM420>>"
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0 a 192.168.100.10
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0 s haxorware.bin
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 2
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0

snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0

krzysztof@Lenovo-B590:~/Pulpit$ clear

krzysztof@Lenovo-B590:~/Pulpit$ ./haxorware
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1 s password
Press ENTER to continue...Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1

snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
Press ENTER to continue...iso.3.6.1.2.1.1.1.0 = STRING: "Thomson DOCSIS Cable Modem <<HW_REV: 4.0; VENDOR: Thomson; BOOTR: 2.1.6d; SW_REV: ST52.02.03; MODEL: TCM420>>"
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0 a 192.168.100.10
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0 s haxorware.bin
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0

snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 2
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0

snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0

Can you help me, please?