Need info!

[aebyss]

Thanks for reply but I guess thats not the problem here is my telnet log.

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 738000000 Hz
Carrier Offset = -6 Hz
Symbol rate = 6952000 sym/sec
SNR = 31 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1a3395a1
Power Level = -18 dB
QAM = LOCKED
FEC = LOCKED
******************************************

CM> Selecting UCD for Us Channel 1

0x0004d3b4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: ( CmDocsisCtlThread) starting ds time sync acquisition...
0x0004d652 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl Thread) downstream time sync acquired...
0x0004d652 [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmD ocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
0x0004d652 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl Thread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> 0x0004ded6 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Serv er Thread) Callback request expired:
timerDuration secs = 1
current time secs = 319
elapsed time secs = 1
CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> 0x000509d8 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server Thread) Callback request expired:
timerDuration secs = 1
current time secs = 330
elapsed time secs = 1
CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)
CM> 0x000557b2 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server Thread) Callback request expired:
timerDuration secs = 1
current time secs = 350
elapsed time secs = 1
0x000557b2 [DHCP Server Thread] BcmDhcpServerIf::ElapsedTimeSec: (DHCP ServerIf Instance(1) for IP Stack2) Lease 192.168.100.11 : htype=0, value=bc 5f f4 d2 d5 43 has EXPIRED!