EPC2100R2 eror , please come

[rebornishard]

run the debrick commands
http://www.sbhacker.net/forum/index.php/...1-debrick/

i install haxorware rev39 lite

jtag> detect

Read IDCODE: 0x0334917f
Manufacturer: Broadcom
Part: BCM3349
Version: 0x0
---------------------------------
Create & Clear RAM Buffer (0x80000000 - 0x80800000)
Load Configuration File: bcm3349.def
IR Length: 0x5
Endian: Big
Protocol: EJTAG
RAM Start Address: 0x80000000
RAM Size: 0x800000
FLASH Start Address: 0x9fc00000
---------------------------------
Read IMPCODE: 0x00800904
EJTAG Version: 1 or 2.0
EJTAG DMA Support: Yes
---------------------------------
Detect FLASH : MX29LV161B
Create & Clear FLASH Buffer (0x9fc00000 - 0x9fe00000)
Read CFI Data:
- Protocol: AMD
- FLASH Size: 0x00200000
- Block[0]: Sectors: 0x01, Sector Size: 0x00004000
- Block[1]: Sectors: 0x02, Sector Size: 0x00002000
- Block[2]: Sectors: 0x01, Sector Size: 0x00008000
- Block[3]: Sectors: 0x1f, Sector Size: 0x00010000
jtag> ldram 9fc00000
Load file: C:\Documents and Settings\Admin\My Documents\9FC00000.bin
jtag> program 9fc00000 200000
- Error Write Sector: 0x9fc06000 !!! Trying Again...
- Error Write Sector: 0x9fc10000 !!! Trying Again...
- Error Write Sector: 0x9fc10000 !!! Trying Again...
- Error Write Sector: 0x9fc20000 !!! Trying Again...
- Error Write Sector: 0x9fc20000 !!! Trying Again...
- Error Write Sector: 0x9fc20000 !!! Trying Again...
- Error Write Sector: 0x9fc20000 !!! Trying Again...
- Error Write Sector: 0x9fc20000 !!! Trying Again...
jtag> stop
Bad command or script file name
jtag> exit
Bad command or script file name
- Error Write Sector: 0x9fc90000 !!! Trying Again...
Program: Complete
jtag> ldram 9fc10000
Load file: C:\Documents and Settings\Admin\My Documents\Downloads\Compressed\New Folder\haxorware11rev39-LITE.bin
jtag> program 9fc10000 130000
Program: Complete

is this right ? then what i must do ?
i can't connect to internet with that modem

thanks a lot