30-10-2012, 08:13 PM
Hi there everyone!, (ABMJR and Southern specially) I have been reading a lot of this forum (and SBH, USBJTAG, etc. before I made my 1st post), trying to figure a way to get my diag modem working.
I have an SB5101+Haxor1.1r39 (South American ISP, won't get into details thanks to the f*kr which made a business out of this and got us all f*kd) which was working fine in a different node at my old place, now I moved and the security is a whole different breed in this node.
With BPI+Bypass I get all lights on but I won't get any IP (IP 169.xx.xx.xx), Meaning that the DHCP is not providing any IP (DHCP shutdown/IP lease killed).
I guess that the proper security in my node is BPI+ (autoserve is out of the question), as I get stuck with a blinking Online LED, waiting for some certs to be injected (out of memory I think is 301.8 auth reject) or the bypass commands thru telnet which Im still studying.
So to resume it, after a lot of research (and lots more to come), I saved a dump of the CM Log and found out that the CMTS is requesting a CVC and BPKM keys (which I guess its all part of the same security process).
So, after doing some more reading and studying the putty log, I ended getting to the conclusion that I had to flash a 2MB virgin dump so the CVC/MAC pair/signature was valid in order to complete the handshake; I found out that my BlackCat is either dead or with driver issues, whatever, made some more reading and ended up getting a USBJTAG NT (pros choice apparently) to get the job done.
So here I am,with hax39 Lite, online and on the provisioning screen [which I cannot get thru cause the CMTS says my levels are out of limit, DS: 2.80 dBmV (seems ok), US: 7.00 dBmV (not OK), SNR: 39.40 dB(OK). ], do you suggest to fix the US level and provision it? Where can this lead me? (I have a 5100 and I flashed a virgin 2MB dump too, then 5100mod, same results)
I also tried getting the config from bpi+bypass and then loading it, but is not accepting autoserve in any way. Tried also loading the certs when a different MAC was changed, but I get the AUT-REJECT, guess it has to be done in a specific time as ABMJR suggests with TELNET.
What about a no-CVC firmware? I still have to compare the two logs, the one with the error and the provisioned one, but work is killing me and I have to invest my days off reading up-late @night (:
Hope my post is not too extensive, any help into getting me into the right direction will be greatly appreciated.
Thanks M8s!
I have an SB5101+Haxor1.1r39 (South American ISP, won't get into details thanks to the f*kr which made a business out of this and got us all f*kd) which was working fine in a different node at my old place, now I moved and the security is a whole different breed in this node.
With BPI+Bypass I get all lights on but I won't get any IP (IP 169.xx.xx.xx), Meaning that the DHCP is not providing any IP (DHCP shutdown/IP lease killed).
I guess that the proper security in my node is BPI+ (autoserve is out of the question), as I get stuck with a blinking Online LED, waiting for some certs to be injected (out of memory I think is 301.8 auth reject) or the bypass commands thru telnet which Im still studying.
So to resume it, after a lot of research (and lots more to come), I saved a dump of the CM Log and found out that the CMTS is requesting a CVC and BPKM keys (which I guess its all part of the same security process).
So, after doing some more reading and studying the putty log, I ended getting to the conclusion that I had to flash a 2MB virgin dump so the CVC/MAC pair/signature was valid in order to complete the handshake; I found out that my BlackCat is either dead or with driver issues, whatever, made some more reading and ended up getting a USBJTAG NT (pros choice apparently) to get the job done.
So here I am,with hax39 Lite, online and on the provisioning screen [which I cannot get thru cause the CMTS says my levels are out of limit, DS: 2.80 dBmV (seems ok), US: 7.00 dBmV (not OK), SNR: 39.40 dB(OK). ], do you suggest to fix the US level and provision it? Where can this lead me? (I have a 5100 and I flashed a virgin 2MB dump too, then 5100mod, same results)
I also tried getting the config from bpi+bypass and then loading it, but is not accepting autoserve in any way. Tried also loading the certs when a different MAC was changed, but I get the AUT-REJECT, guess it has to be done in a specific time as ABMJR suggests with TELNET.
What about a no-CVC firmware? I still have to compare the two logs, the one with the error and the provisioned one, but work is killing me and I have to invest my days off reading up-late @night (:
Hope my post is not too extensive, any help into getting me into the right direction will be greatly appreciated.
Thanks M8s!