Haxorware 1.1 r39

[lance9457]

http://www.haxorware.com/forums/attachment.php?aid=367
replace haxorware11revXX-XXXX.bin with image0 from the above archive

Code:

Upgrading from previous shelled firmware (infinite) or Haxorware 1.0

  Set your computers ip to 192.168.100.10
  Set up a TFTP server with haxorware11revXX-XXXX.bin in its root
  Make sure the haxorware webgui isn't currently open
  Connect to modem with hyperterminal or telnet to the IP 192.168.100.1
  Enter your username and password
  cd /ip
  ipconfig 1 release
  y
  dload -i 1 -l -f 192.168.100.10 haxorware11revXX-XXXX.bin
  y
  cd /
  reset

i have windows 7 i don't have hyperterminal

---

http://www.haxorware.com/forums/attachment.php?aid=367
replace haxorware11revXX-XXXX.bin with image0 from the above archive

Code:

Upgrading from previous shelled firmware (infinite) or Haxorware 1.0

  Set your computers ip to 192.168.100.10
  Set up a TFTP server with haxorware11revXX-XXXX.bin in its root
  Make sure the haxorware webgui isn't currently open
  Connect to modem with hyperterminal or telnet to the IP 192.168.100.1
  Enter your username and password
  cd /ip
  ipconfig 1 release
  y
  dload -i 1 -l -f 192.168.100.10 haxorware11revXX-XXXX.bin
  y
  cd /
  reset

i have windows 7 i don't have hyperterminal

also how to connect to telnet with 192.168.100.1