29-07-2012, 03:43 PM
(This post was last modified: 29-07-2012, 03:47 PM by southernyankey1970.)
What are your signal levels like? anything between -10 and -15 can keep the cm from syncing. Different modems operate on their own....i have one or two that refuse to lock on anything less than -10 and some that will run on -17.
A signal like this is about as pretty as it gets. I bypass the rest of the house with a run of quality RG6 from the tap to my Cm.
Frequency 555000000 Hz
Signal To Noise Ratio 40.0 dB
Power Level 0.6 dBmV
The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Upstream Value
Channel ID 2
Frequency 29600000 Hz
Power 43.4 dBm
A signal like this is about as pretty as it gets. I bypass the rest of the house with a run of quality RG6 from the tap to my Cm.
Frequency 555000000 Hz
Signal To Noise Ratio 40.0 dB
Power Level 0.6 dBmV
The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
Upstream Value
Channel ID 2
Frequency 29600000 Hz
Power 43.4 dBm