Haxorware Forums › General › Modems v
Virmin UK issues

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Virmin UK issues
fubofo Offline
Junior Member
**
Posts: 5
Threads: 1
Joined: Apr 2009
Reputation: 0
#1
07-04-2009, 11:38 PM
Hey guys does anyone have any information regarding whats going on with Virmin in the UK ? all the modems are being hit and its driving me nuts.

here is a log I managed to obtain in the 5 seconds between shoing operational and going into constant ranging:

earing in mind -
Area = Belfast, UK
BPI = disabled
modem MAC = brand new, untested, presumed workng
NIC MAC = brand new, untested, presumed wprking
config = unforced
modem = Motorola SB5101
firmware - Haxorware 1.1 rev30

Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2009.04.07 22:33:13 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: root
Password: *****
Welcome.

CM>
CM> 0x00012142 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RngRspMsgEvent:  (CmDocsisCtlThread) Received a RNG-RSP with ABORT!  Going elsewhere...
0x0001214c [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler:  (CmDocsisCtlThread)  reason: 7 (kRngRspAbortStatus)
0x0001214c [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent:  (CmDocsisCtlThread)  reason: 7 (kRngRspAbortStatus)
BcmCmDocsisStatusEventCodes::kCmIsNotOperational
0x0001214c [CmDocsisCtlThread] BcmVendorCmApplication::StartDhcpServer:  (VendorExtension CmApp) Starting DHCP Server!
0x0001214c [IGMP Thread] BcmIgmpThread::Stopping Igmp Thread...:  (IGMP Thread)
CamDeleteAddress: Deleted address from cam segment 0
Logging event: Unicast Ranging Received Abort Response - Re- initializing MAC
Logging event: Rng Rsp Abort Status - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x3e6
0x00012214 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows:  (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc:  Releasing the lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc:  Sending Release packet; client id htype=1, value=00:14:a4:c4:7a:cc
0x00012228 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket:  (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x00012228 [DHCP Client Thread] BcmDhcpClientIf::SendRelease:  (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet!  Oh, well, no biggie...
0x00012228 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) Removing lease IP address 10.172.37.194 from IP stack 1
0x00012232 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl:  (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x00012232 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl:  (IP Stack1 HalIf)
Shutting down IP stack 1

CM>   DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00012322 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState:  (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0001232c [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:  (Scan Downstream Thread) Downstream Channel scan stopped!
0x00012340 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain:  (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 331000000
Scanning DS Channel at 331000000 Hz... (Initial target freq)

CM> 0x000125ac [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit:  (CmDocsisCtlThread) Locked on the downstream.  Waiting for UCDs...

******************************************
            DOWNSTREAM STATUS
******************************************
  Tuner Frequency = 331000000 Hz
   Carrier Offset = -7 Hz
      Symbol rate = 5360537 sym/sec
              SNR = 37 dB
         QAM Mode = QAM256
        Tuner AGC = 0xfff00000
           IF AGC = 0x12123418
      Power Level = 14 dB
              QAM = LOCKED
              FEC = LOCKED
******************************************


CM> Selecting UCD for Us Channel 2

0x000131be [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync:  (CmDocsisCtlThread) starting ds time sync acquisition...
0x00013434 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtlThread) downstream time sync acquired...
0x00013434 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit:  (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 40.0 dBmV
0x0001343e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk:  (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control  for level 7 is 0.

CM>
RNG-RSP  Adj: tim=1548 power=0 freq=0  Stat=Continue

CM>
RNG-RSP  Adj: tim=0 power=0 freq=0  Stat=Success

******************************************
            UPSTREAM STATUS
******************************************
       Upstream Status = UP
      Upstream Channel = 2
    Upstream Frequency = 29200000 Hz
        Upstream Power = 40 dBmV
           Ranging SID = 0x3e6
  Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc:  Waiting 1 seconds before sending Discover; client id htype=1, value=00:14:a4:c4:7a:cc
Not logging event ID 2307948624, control  for level 7 is 0.

CM> DHCPc:  Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc

CM> DHCPc:  Timed out waiting for offers for lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc:  No valid offers to select; need to send discover again.
Logging event: DHCP FAILED - Discover sent, no offer received

CM> DHCPc:  Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc

CM> DHCPc:  Timed out waiting for offers for lease with client id htype=1, value=00:14:a4:c4:7a:cc
DHCPc:  No valid offers to select; need to send discover again.
Logging event: DHCP FAILED - Discover sent, no offer received

CM> DHCPc:  Sending Discover packet; client id htype=1, value=00:14:a4:c4:7a:cc

CM>
Find
Reply
rajkosto Offline
Administrator
*******
Posts: 358
Threads: 9
Joined: Oct 2008
Reputation: 25
#2
08-04-2009, 07:22 AM
0x00012142 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RngRspMsgEvent: (CmDocsisCtlThread) Received a RNG-RSP with ABORT! Going elsewhere...

what happened before that ?
[Image: 2qu0z8h.gif]
Website Find
Reply
fubofo Offline
Junior Member
**
Posts: 5
Threads: 1
Joined: Apr 2009
Reputation: 0
#3
08-04-2009, 09:56 AM (This post was last modified: 08-04-2009, 10:00 AM by fubofo.)
(08-04-2009, 07:22 AM)rajkosto Wrote: 0x00012142 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RngRspMsgEvent: (CmDocsisCtlThread) Received a RNG-RSP with ABORT! Going elsewhere...

what happened before that ?

OK so these are the steps of what happened:

- changed modem MAC, saved and rebooted
- waited until all lights gone off, then changed NIC MAC
- went to haxorware page and waited until showed operational and assigned IP to my NIC (couldnt have telnet session open as it closes straight away when DCHP assigns IP to my NIC)
- quickly downloaded config (to read for curiosity sake) and opened putty/telnet (as soon as obtained NIC IP from modem)
- within the few seconds of me opening telnet thats where it started logging from (the 'Operational' only lasted a few split seconds)

This type of behaviour has been happenning for the last week or two with modem MACs either:

# showing Operational and working for anywhere from 5min-1 day (followed by constant ranging)
# showing Operational but not browsing net at all
# never showing Operational, constant ranging

PS. Ill post up the config some point after work if it will help (or a screenshot of it)
Find
Reply
RowaN Offline
Haxorware Enthusiast
***
Posts: 20
Threads: 8
Joined: Nov 2008
Reputation: 0
#4
08-04-2009, 07:37 PM
"all the modems are being hit"

Mine isn't. SB5101 with haxorware 1.1 rev31
Find
Reply
fubofo Offline
Junior Member
**
Posts: 5
Threads: 1
Joined: Apr 2009
Reputation: 0
#5
08-04-2009, 07:54 PM
(08-04-2009, 07:37 PM)RowaN Wrote: "all the modems are being hit"

Mine isn't. SB5101 with haxorware 1.1 rev31

OK lucky you .Ill make sure I verify my sources before I make a broad sweeping statement next time.
Find
Reply
cisk Offline
Junior Member
**
Posts: 6
Threads: 2
Joined: Feb 2009
Reputation: 0
#6
08-04-2009, 08:55 PM
(08-04-2009, 07:54 PM)fubofo Wrote:
(08-04-2009, 07:37 PM)RowaN Wrote: "all the modems are being hit"

Mine isn't. SB5101 with haxorware 1.1 rev31

OK lucky you .Ill make sure I verify my sources before I make a broad sweeping statement next time.


Alot of people in the Uk having issues.

Ive seen alot of reports Of "BPI Bypass" doing the job.
Find
Reply
fubofo Offline
Junior Member
**
Posts: 5
Threads: 1
Joined: Apr 2009
Reputation: 0
#7
08-04-2009, 09:17 PM (This post was last modified: 08-04-2009, 09:36 PM by fubofo.)
Yeah some people r saying that, though it doesnt seem to work in my cases

Here if the config.
http://www.4shared.com/file/97477485/80c...rced_.html

It would be nice if Rajokosto could provide his 2 cents about this as it affecting his Haxorware firmware, and in my view hes the best to be looking at this
Find
Reply
nigel121 Offline
Junior Member
**
Posts: 4
Threads: 2
Joined: Apr 2009
Reputation: 0
#8
09-04-2009, 02:53 AM
think i posted some logs the other day um this isnt national yet... its spreading though been down 2 weeks in grimsby
Find
Reply
ModemHacks Offline
Junior Member
**
Posts: 5
Threads: 0
Joined: Mar 2009
Reputation: 0
#9
02-07-2009, 08:30 PM (This post was last modified: 02-07-2009, 08:30 PM by ModemHacks.)
Maybe because you are getting 50MB Installed down your area. only saying this becuase it happened to me I Kep getting hit for 2 weeks because the 50MB Service was being installed.
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#10
02-07-2009, 09:35 PM
it's a network change over give it a few weeks to settle
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)