rca dcm315

[wdw2050]

how do i log in to change the bpi?
it has no login page, i got to 192.168.100.1 and get the manager config screen but canchange nothing. this the software ver.
Software Version: SB5100-2.3.2.5-SCM01-NOSH

[drewmerc]

192.168.100.1:666 or 192.168.100.1/1337 i think

[wdw2050]

nope tried both

[drewmerc]

ok seeing as we have no idea what firmware your running we'll need to work around it, so download ip full http://www.haxorware.com/forums/attachment.php?aid=299
it's in Spanish but easy to work out what you want to do (plus you may be able to know what your firmware is)

so install the controles (just run the bat file in the controles folder) and start ip full
1.click the telnet tab
2.select a firmware from the drop down menu
3. click conectar
4. click activar bpi+ (or what ever bpi/docsis you want)
if the above dont work try a different firmware (step 2)



if none of the above work then things get funky

[wdw2050]

it didnt work but when i change to port 80 it connect but it didnt show writing to modem is there a different port and i am using a network cable here is a pic


Uploaded with ImageShack.us

[drewmerc]

start up hyper terminal and tell me what it says (eg what does the telnet login screen look like)

that picture your showing tells me nothing

[wdw2050]

ok but look now when i turn that program on i can get to the net but once i turn it off i get the provision screen?

[drewmerc]

i'm still trying to work out what firmware your running so i can give correct instructions

so you have still not told me what it says so i can work it out

[Mordeth]

192.168.100.1:666 or 192.168.100.1/1337 i think

It should be 192.168.100.1:1337

Make sure to set it with static ip when trying both.

[wdw2050]

192.168.100.1:666 or 192.168.100.1/1337 i think

It should be 192.168.100.1:1337

Make sure to set it with static ip when trying both.

set what up my nic card are the prgram