5100 works (5100Mod) but 5101i doesn't work (haxorware rev30)

[tecster]

Hello, my question is i am trying to setup a 5101 for my friend i flashed it with haxorware rev30
I am using a 5100 for myself with 5100Mod, it gets config files like reject.cm 512.cm 1024.cm --- 61440.cm and i can make up any mac address write it into modem as well as i can write config file name to download from asp and it works good, but i take the coax out and put it in 5101 and it gets configs like ",,32yuete" "subtyu6uyt" without internet connection (same as reject.cm) and when i write the same config name (61440.cm) it reboots immediately it gets the file.
same coax, same computer
i don't know the security type but i don't have to find any macs to get online with 5100, i just make up a mac and write it, tell the config it gets online, can you help me?
thanks in advance

[drewmerc]

try using a very old version of hax

[southernyankey1970]

The only way to run on a random mac is bpi bypass or disabled. Check your bpi settings in haxorware.

[tecster]

ok so i tried with bpi bypass and disabled, edited the tftp address and config file name, all the lights are on but after a few seconds it doesnt let me enter in 192.168.100.1 can't get ip, when i take out the power cable and put it in the same lights on and boom ip gets 169...

and i will try to find the old versions of hax and try it, yeah if you want to help me, ok sure

[sixteen]

ok so i tried with bpi bypass and disabled, edited the tftp address and config file name, all the lights are on but after a few seconds it doesnt let me enter in 192.168.100.1 can't get ip, when i take out the power cable and put it in the same lights on and boom ip gets 169...

and i will try to find the old versions of hax and try it, yeah if you want to help me, ok sure

Think mcfly think, if you can get a 5100 online with a shitty 51mod why cant you get a 5101 with hax, any hax?.................you have no security ease fix.

[dragonlord7791]

play i little whith baseline privacy on haxorware,should be easy to be online in your isp

[tecster]

ok so here's the new update,
i wasnt able to connect with 5101 hax because the security system was changed before, i was able to connect with my 5100mod because it was always online so as i read it didnt get the new security, and now 5100mod is offline too.

i have questions and i know i have to find the way myself to bypass the new security, but you can always help me with pm, i am not working for any isps and i am not even living in your countries, and i am just trying to connect my modem and my friends modem online, because we are now connecting to the internet with mobile phone tethering so its really difficult to do alot without exceeding the quota limitations of cell phones so pls help us

ok so after my 5100mod gone offline i started reading and tried to connect to the net with 5101 hax on it, no success, i unticked the options except for the disable upgrades and force network connection in stealth, wrote a random mac, and a random config file 10240.cm, after this all lights went on, and i got a good ip like i can connect, accessed the overview page on hax and saw my 10240.cm downloaded and opened it in vultureware, network access was 0, checked the other options there, i got my modems upgrade config file info and server info, down and upload limitations were 64000, so i downloaded the firmware which was like 850kb i downt know if i cab do anything with it. even tho i wasnt connected to the internet with force network option i can get an ip and asa i got ip the "!" mark on network connection returns to normal but no internet, so i tried to scan the macs with supersnmp and success i found around 150 macs, when i clone a mac address i can get online for a few seconds and then offline because two macs cant be online at the same time?! when i try the fast speed macs while the modem is booting send light blinks and stays like that i waited for 5 minutes maybe nothing happened.

i tried to spoof my 5101 model vendor and version as a 5100 to see if the isp will send me a config including an update with 5100 but no it is still sending for updatez for 5101, so i checked with cloned mac and i was able to see the firmware upgrade info within the cm file which belongs to that macs vendor.

i tried to connect 5100mod again, all lights are going on and them power light starts flashing always.

i really dont know what to do, you will ask for a telnet log and i cant do it now because chckdsk option is running on my computer for now, when it finishes i will send a log,

i dont know how to bypass the new security system, ican still get a valid ip and now supersnmp is not working also, please help

[tecster]

here's the log when it comes up with a valid ip and no internet access in the config file, mac is random! i can see the security type doesnt check for cvc? it says valid certs, ok so what do you see? that is the important point

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.11 21:50:04 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon

Username: root
Password: ****
Welcome.

CM>
CM> run
CM>
CM> run_app


Running the system...


Beginning Cable Modem operation...

0x0001c638 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Favorite[0].freq = 573000000
Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM64/256

CM> 0x0001c89a [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 573000000 Hz
Carrier Offset = -5 Hz
Symbol rate = 5360537 sym/sec
SNR = 38 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x1574a999
Power Level = 1 dB
QAM = LOCKED
FEC = LOCKED
******************************************


CM> Calculating maximum number of IP filters:
Each IP filter consumes 3932 bytes of RAM.
Current free RAM is 454672 bytes.
Max heap reserved for IP filters (25%) = 113668
We can support 28 IP filters.
Calculating maximum number of LLC filters:
Each LLC filter consumes 724 bytes of RAM.
Current free RAM is 452580 bytes.
Max heap reserved for LLC filters (25%) = 113145
We can support 156 LLC filters.
0x0001cd36 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001cd5e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001cdc2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM> Selecting UCD for Us Channel 3

0x0001d268 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x0001d4fc [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x0001d506 [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 35.0 dBmV
0x0001d506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
0x0001d510 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
Not logging event ID 2307948724, control for level 7 is 0.
0x0001d52e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001d592 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM>
RNG-RSP Adj: tim=2369 power=-8 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

CM> 0x0001dce0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001dcfe [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001dd62 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue

CM> 0x0001e4b0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001e4ce [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001e532 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM>
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 40400000 Hz
Upstream Power = 34 dBmV
Ranging SID = 0x1a44
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:20:22:33:44:55
Not logging event ID 2307948624, control for level 7 is 0.

CM> 0x0001ec80 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001ec9e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001ed02 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM> DHCPc: Sending Discover packet; client id htype=1, value=00:20:22:33:44:55
DHCPc: Received an Offer from DHCP server 70:ca:9b:a7:a4:d9 (10.48.0.1); lease client id htype=1, value=00:20:22:33:44:55
0x0001f450 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM> 0x0001f46e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001f4d2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:20:22:33:44:55
DHCPc: Sending Request packet; client id htype=1, value=00:20:22:33:44:55
DHCPc: Received an Ack from DHCP server 70:ca:9b:a7:a4:d9 (10.48.0.1); lease client id htype=1, value=00:20:22:33:44:55
Current IP address is default 0.0.0.0.
0x0001fb30 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.48.40.57 (primary IP address)
Subnet Mask = 255.255.0.0
Router = 10.48.0.1
IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.48.0.1
MAC = 70:ca:9b:a7:a4:d9
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:20:22:33:44:55
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x20e320a6
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 70:ca:9b:a7:a4:d9
My offered IP address = 10.48.40.57 (primary IP address)
(1) Subnet Mask = 255.255.0.0
(3) Router IP address = 10.48.0.1
(54) DHCP Server IP address = 192.168.44.195
(82) Relay Agent IP address = 10.48.0.1
TFTP Server IP address = 10.48.0.1
CM Configuration file = 'Bsgvca69834ncxv9873254k;fg'
(2) UTC Time Offset = 1 seconds
(4) Time Server IP address = 192.168.44.196
(6) Domain Name Server =
(7) Log Server IP address =
(51) Lease time = 588814 seconds
(58) T1 (renew) = 294407 seconds
(59) T2 (rebind) = 515212 seconds
Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.48.40.57, Subnet=255.255.0.0, Gateway=10.48.0.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.48.40.57
Starting Time Of Day...
0x0001fbd0 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 192.168.44.196
Connecting to ToD server 192.168.44.196...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.48.40.57:161
Not logging event ID 2291949724, control for level 7 is 0.
0x0001fc20 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001fc3e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0001fca2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
UTC returned by ToD server 3582557435; UTC offset 1
Current system time -> Thu Jul 11 18:50:36 2013

System start time -> Thu Jul 11 18:48:26 2013

Starting Tftp of configuration file...
Opening file 'Bsgvca69834ncxv9873254k;fg' on 10.48.0.1 for reading...
tftp-enforce bypass is using 10.48.0.1:Bsgvca69834ncxv9873254k;fg
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Unknown
Forcing Config File name to 61440.cm

CM> 0x000203e6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x0002040e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x00020472 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x000204e0 [CmDocsisIpThread] Tftp Client::GetReply: (Tftp Client) Timed out on socket select!
0x000204e0 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) Attempt #(1) Backoff (2) Exp Block #(1) Last Block #(0) Recv'd Block #(0)
tftp-enforce bypass is using 10.48.0.1:Bsgvca69834ncxv9873254k;fg
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Unknown
Forcing Config File name to 61440.cm
Storing received cfg of size 1430 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 10.48.0.1
Server Port Number = 69
Total Blocks Read = 3
Total Bytes Read = 1430

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 -> 0.0.0.0
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 -> 0.0.0.0
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.1 -> public
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 2 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.1 -> @
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.2 -> 0.0.0.0
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.2 -> 0.0.0.0
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.2 -> private
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.2 -> @
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32)
TLV-11[13]: 1.3.6.1.4.1.1166.1.19.3.2.2.0 -> 1 (i32)
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.48.40.57:161
13 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...

MAC MGT msg buf, len=191
00 20 22 33 44 55 70 ca 9b a7 a4 75 00 b1 00 00 | . "3DUp....u....
03 01 07 00 1a 44 00 05 2d 01 01 01 02 01 02 03 | .....D..-.......
01 01 04 01 01 06 01 01 07 01 0f 08 01 10 0a 01 | ................
01 0b 01 18 0c 01 01 0f 01 00 10 04 00 00 00 01 | ................
11 01 01 13 01 01 18 4d 01 02 00 01 02 04 00 00 | .......M........
34 93 03 02 1a 44 04 08 44 65 66 52 52 55 70 00 | 4....D..DefRRUp.
06 01 07 07 01 06 08 04 00 00 fa 00 09 04 00 00 | ................
0b e4 0a 04 00 00 00 00 0b 02 00 00 0c 02 00 00 | ................
0d 02 00 c8 0e 02 0b e4 0f 01 02 10 04 00 00 00 | ................
00 17 02 ff 00 19 28 01 02 00 03 02 04 00 00 34 | ......(........4
94 04 0a 44 65 66 52 52 44 6f 77 6e 00 06 01 07 | ...DefRRDown....
07 01 06 08 04 00 00 fa 00 09 04 00 00 0b e4 | ...............



MAC MGT header:
dest addr: 00:20:22:33:44:55
src addr: 70:ca:9b:a7:a4:75
msg len: 0xb1 (177)
DSAP: 0
SSAP: 0
control: 0x3
version: 0x1
msg_type: 0x7 REG_RSP
fka reserved: 0

MSG PDU:
primary sid: 0x1a44
response code: 0 (kConfOk)


CM modem capabilities: T=0x05 (005) L=0x2d (045) V=
concat support: T=0x01 (001) L=0x01 (001) V=0x01 (1)
DOCSIS version: T=0x02 (002) L=0x01 (001) V=0x02 (2)
frag support: T=0x03 (003) L=0x01 (001) V=0x01 (1)
PHS support: T=0x04 (004) L=0x01 (001) V=0x01 (1)
BPI version: T=0x06 (006) L=0x01 (001) V=0x01 (1)
num DS SAID's: T=0x07 (007) L=0x01 (001) V=0x0f (15)
num US Sid's: T=0x08 (008) L=0x01 (001) V=0x10 (16)
TxEq Taps per Symbol: T=0x0a (010) L=0x01 (001) V=0x01 (1)
num TxEq Taps: T=0x0b (011) L=0x01 (001) V=0x18 (24)
DCC support: T=0x0c (012) L=0x01 (001) V=0x01 (1)
Unknown type. Ignore!: T=0x0f (015) L=0x01 (001) V=00 | .
Unknown type. Ignore!: T=0x10 (016) L=0x04 (004) V=00 00 00 01 | ....
L2VPN capability: T=0x11 (017) L=0x01 (001) V=0x01 (1)
DUT filtering support: T=0x13 (019) L=0x01 (001) V=0x01 (1)

v1.1 US flow sets: T=0x18 (024) L=0x4d (077) V=
CM flow ref: T=0x01 (001) L=0x02 (002) V=0x0001 (1)
sfid: T=0x02 (002) L=0x04 (004) V=0x00003493 (13459)
sid: T=0x03 (003) L=0x02 (002) V=0x1a44 (6724)
service class name: T=0x04 (004) L=0x08 (008) V='DefRRUp' 44 65 66 52 52 55 70 00 | DefRRUp.
QoS param set type: T=0x06 (006) L=0x01 (001) V=0x07 (7)
traffic priority: T=0x07 (007) L=0x01 (001) V=0x06 (6)
max tx rate, bps: T=0x08 (008) L=0x04 (004) V=0x0000fa00 (64000)
max burst, MAC bytes: T=0x09 (009) L=0x04 (004) V=0x00000be4 (3044)
res tx rate, bits/sec: T=0x0a (010) L=0x04 (004) V=0x00000000 (0)
res rate pkt size: T=0x0b (011) L=0x02 (002) V=0x0000 (0)
inactivity Active,sec: T=0x0c (012) L=0x02 (002) V=0x0000 (0)
inactivity Admit, sec: T=0x0d (013) L=0x02 (002) V=0x00c8 (200)
max concat burst, byt: T=0x0e (014) L=0x02 (002) V=0x0be4 (3044)
us bw sched strategy: T=0x0f (015) L=0x01 (001) V=0x02 (2)
CM us req/tx options: T=0x10 (016) L=0x04 (004) V=0x00000000 (0)
IP ToS overwrite: T=0x17 (023) L=0x02 (002) V=ff 00 | ..


v1.1 DS flow sets: T=0x19 (025) L=0x28 (040) V=
CM flow ref: T=0x01 (001) L=0x02 (002) V=0x0003 (3)
sfid: T=0x02 (002) L=0x04 (004) V=0x00003494 (13460)
service class name: T=0x04 (004) L=0x0a (010) V='DefRRDown'
44 65 66 52 52 44 6f 77 6e 00 | DefRRDown.
QoS param set type: T=0x06 (006) L=0x01 (001) V=0x07 (7)
traffic priority: T=0x07 (007) L=0x01 (001) V=0x06 (6)
max tx rate, bps: T=0x08 (008) L=0x04 (004) V=0x0000fa00 (64000)
max burst, MAC bytes: T=0x09 (009) L=0x04 (004) V=0x00000be4 (3044)

0x00020756 [CmDocsisCtlThread] BcmCmDocsisCtlThread:arseAndValidateRegRspMsg: (CmDocsisCtlThread) ERROR - REG-RSP parse error. continuing.
0x00020756 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
Non-Vol BPI Settings successfully written to the device.
Manufacturer CVC verified
At least one CVC is valid.
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
BPI+ Bypass enabled
Forcing network access.
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
0x00020a26 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x00020a30 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x00020a3a [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x00020a3a [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x00020a3a [Motorola Standby Switch Thread] BcmStandbySwitchThread:rocessSwitchEvent: (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Logging event: REG-RSP - invalid format or not recognized
0x00020bb6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 2296948624, control for level 7 is 0.
0x00020bde [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x00020c42 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM> 0x00021386 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x000213ae [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x00021412 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM> 0x00021b56 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x00021b7e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...
0x00021be2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring...

CM>

[drewmerc]

stopped reading at

Starting Tftp of configuration file...
Opening file 'Bsgvca69834ncxv9873254k;fg' on 10.48.0.1 for reading...
tftp-enforce bypass is using 10.48.0.1:Bsgvca69834ncxv9873254k;fg
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass failed.Error Unknown
Forcing Config File name to 61440.cm

yes it fails but it will still force the incorrect name

[tecster]

it forces the 61440.cm config and when check the overview page i can see 61440.cm downloaded but its not the actual 61440.cm because 2 things

1) when i open 61440.cm with vulturware network access is still 0, down/up caps are 64000 (same config settings as rejected modems)
2) if i write any name even my nick name to config settings in haxorwa it downloads that config wit the sam capped down/up