is there a bitware 101???

[graco1]

after buying a premodded 1602 what do i need to do???? i put in cm cert,config cm,key bin,mfg cert,mfg key bin, and root key, change mac with cert and 3rd light blinking never stops

[Wichin12]

Are you trying to force config, try without forcing a config first and see if you can lock channels

[cwaniak81]

Just like Wichin12 said forcing can be an issue ,bad config or no more forcing.... if you have a dual boot version try dev19 or dev9 and vice versa..Good luck

[graco1]

Update 1.0.5.7 WORKED

[xuhue]

Update 1.0.5.7 WORKED

how to update 1.0.5.7 ?

[usajinshan]

after buying a premodded 1602 what do i need to do???? i put in cm cert,config cm,key bin,mfg cert,mfg key bin, and root key, change mac with cert and 3rd light blinking never stops

I have same problem with you!   only light can not stop!  no working！  why can help me :please email to me :usapzq@gmail.com   thanks a lot

[usajinshan]

Are you trying to force config, try without forcing a config first and see if you  can lock channels

can you help me see about arris 1602 modem....  my modem no working,,,here is my modem doscic log :[INFO] [COMMON_COMPONENTS.GIM(pid=124)]: GIM initializing...
[INFO] [COMMON_COMPONENTS.GIM(pid=124)]: GIM initialization complete. GIM_MODULE=3086
[INFO] [COMMON_COMPONENTS.L2SWITCH(pid=123)]: Initializing L2switch library...
[INFO] [COMMON_COMPONENTS.L2SWITCH(pid=123)]: Initializing L2switch...
[INFO] [COMMON_COMPONENTS.L2SWITCH(pid=123)]: L2switch initialized successfully
[INFO] [DOCSIS.INIT(pid=134)]: Exec NvramDb_Init
[INFO] [DOCSIS.NVRAM_DB(pid=134)]: Restoring NVRAM DB from NVRAM ... SUCCESS
[INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_DbInit
[INFO] [DOCSIS.BPI(pid=134)]: readCertsFromNvram: #### CM Private Key already in the clear - legacy CA
[INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_BpiAuthDb_DbInit
[INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_BpiTekDb_DbInit
[INFO] [DOCSIS.INIT(pid=134)]: Exec Bpi_SaMapDb_DbInit
[INFO] [DOCSIS.INIT(pid=134)]: Exec SWDL_SwDlDb_Init
[INFO] [DOCSIS.INIT(pid=134)]: Exec HalDb_Init
[INFO] [DOCSIS.INIT(pid=134)]: Exec UpstreamParamsDb_Init
[INFO] [DOCSIS.INIT(pid=134)]: Exec qos_IntDb_Init
[WARNING] [DOCSIS.QOS(pid=134)]: Failed reset DSX TA SM to IDLE on TA DB Reset
[INFO] [DOCSIS.INIT(pid=134)]: Exec CoSDb_Init
[INFO] [DOCSIS.INIT(pid=134)]: Exec PrimaryDsFreqOverrideDb_Init
[INFO] [DOCSIS.INIT(pid=134)]: Exec L2vpnDb_Init
[INFO] [DOCSIS.DOCSISCFG_DB(pid=134)]: IpProvisMode=0
[INFO] [DOCSIS.INIT(pid=134)]: Looking for LSDDB /nvram/1/lsddb.ini
[ERROR] [COMMON_COMPONENTS.LSDDB(pid=302)]: LSDDB - actualDb == NULL
[INFO] [ARRIS.INIT(pid=312)]: ************** ARRIS Init ***************
[INFO] [ARRIS.DB(pid=312)]: Database Manager Initialization complete
[INFO] [ARRIS.INIT(pid=312)]: **************** App Mode ***************
[INFO] [ARRIS.INIT(pid=312)]: ************ Initializing Ethernet *************
[INFO] [ARRIS.DB(pid=312)]: HomePlug shared memory initialization complete
[INFO] [ARRIS.DB(pid=312)]: ARRIS MTA Surveillance Port Initialization complete
[INFO] [ARRIS.DB(pid=312)]: ARRIS TR143 SPEEDTEST Database Manager Initialization complete
[INFO] [ARRIS.DB(pid=312)]: ARRIS npm Database Manager Initialization complete
[INFO] [ARRIS.INIT(pid=312)]: ****** HWRESET *******
[INFO] [ARRIS.INIT(pid=312)]: ********** Initializing Telnet **********
[INIT] [ARRIS.RF_SCAN(pid=312)]: Initializing RF frequency scanner
[INFO] [ARRIS.RF(pid=312)]: RF Initialization complete
[INFO] [ARRIS.INIT(pid=312)]: ******** Initializing Webserver *********
[ERROR] [ARRIS.INIT(pid=312)]: Error: CM Private Key is not installed
[ERROR] [ARRIS.INIT(pid=312)]: Failed to disable ATOM UART
[INFO] [ARRIS.INIT(pid=312)]: ********* ARRIS Init Complete **********
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[25]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[26]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[27]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[28]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[29]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[30]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[31]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=347)]: DS[32]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [COMMON_COMPONENTS.WLAN_RPC(pid=351)]: LSD - Failed to register RPC to host 192.168.254.254
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[25]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[26]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[27]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[28]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[29]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[30]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[31]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[ERROR] [DOCSIS.HAL_PHY(pid=351)]: DS[32]: PHY_ConfigDsReceiver() failed, PHY supprort only 24DS.
[INFO] [DOCSIS.HAL_TUNER(pid=296)]: Device #0 initialization (HAL_mxlHrclsDeviceGlobalInitSrv) Start
[INFO] [ARRIS.NVM(pid=356)]: NVM Write
[INFO] [DOCSIS.HAL_TUNER(pid=296)]: ****** MxL Tuner device #0 initialization SUCCESS ********
[INFO] [DOCSIS.HAL_TUNER(pid=296)]: **** MxL Tuner Configuration done successfully ****
[INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane[0] released from reset - ok [Reg 0x1e44 = 0x5481]
[INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane 0 Init done ok [disable_tx_loops=0 SerDes_lock_loops=0 power_up_SerDes_loops=0]
[INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane[1] released from reset - ok [Reg 0x1e45 = 0x5481]
[INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF lane 1 Init done ok [disable_tx_loops=0 SerDes_lock_loops=0 power_up_SerDes_loops=0]
[INFO] [DOCSIS.HAL_PHY(pid=351)]: HSIF Init done ok [counters_loops=0 sync_lock_loops=0 ]
[INFO] [DOCSIS.HAL(pid=351)]: Puma HSIF initialization done. DS lanes are locked
[INFO] [DOCSIS.HAL_TUNER(pid=296)]: US DAC PSM NOT enabled on this board!
[INFO] [DOCSIS.HAL_TUNER(pid=296)]: Setting DAC state to 1
[INFO] [DOCSIS.HAL_PHY(pid=351)]: No errors in HSIF lanes
[INFO] [DOCSIS.HAL_PHY(pid=351)]: No errors in HSIF lanes
[INFO] [DOCSIS.HAL(pid=351)]: Tuner HSIF initialization done. US is locked
[INFO] [DOCSIS.HAL(pid=351)]: Tuner HSIF initialization done. US is locked
[INFO] [DOCSIS.HAL(pid=351)]: PGA enable. AMP_OFF - Normal
[ERROR] [COMMON_COMPONENTS.WLAN_RPC(pid=427)]: LSD - Failed to register RPC to host 192.168.254.254
[INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Control socket created successfully
[INIT] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Init successfully
[INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Opening SNMP service
[INFO] [COMMON_COMPONENTS.EVENT_MNGR(pid=437)]: Starting main loop
[INFO] [DOCSIS.DBRIDGE(pid=442)]: Connect DOCSIS local bridge : Connect, lsdActive 0
[INFO] [DOCSIS.DBRIDGE(pid=442)]: Linked system NPGroups (/nvram/1/npgroups.ini) to default LSDB (/etc/npgroups.ini)
[INFO] [DOCSIS.DBRIDGE(pid=442)]: Create LSDs: /nvram/1/lsddb.ini assign VLAN per port
[INFO] [COMMON_COMPONENTS.LSD(pid=442)]: LSD - Create LSD devices: /nvram/1/lsddb.ini
[WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=442)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=RGMII0, Tagged=0
[INFO] [DOCSIS.DBRIDGE(pid=442)]: Connect NP for all groups (cannot parse NPGroups file)
[WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=442)]: L2SWITCH_SetPortTaggingMode:2275 Port already has desired tagging mode, Port=DOCSIS, Tagged=1
[INFO] [DOCSIS.DMG(pid=442)]: DMG_guard_Enable:: DMG_EnableCtr == -1
[INFO] [DOCSIS.CHM(pid=351)]: Init 32 DOCSIS DS channels
[INFO] [DOCSIS.CHM(pid=351)]: Init 8 US channels
[INFO] [DOCSIS.FREQ_SCAN(pid=351)]:
[INFO] [DOCSIS.FREQ_SCAN(pid=351)]: *** CM SYNCHRONIZING... ***
[INFO] [DOCSIS.FREQ_SCAN(pid=351)]:
[INFO] [ARRIS.RF_SCAN(pid=351)]: ----> NB Scanning 471000000 Hz
[INFO] [DOCSIS.HAL(pid=405)]: 1 Passed Qam Lock.
[INFO] [DOCSIS.HAL(pid=405)]: 1 Passed FEC Lock.
[INFO] [DOCSIS.HAL(pid=405)]: 1 Passed Mpeg Lock.
[INFO] [DOCSIS.HAL(pid=405)]: DS recevier 1 lock successfully on DS frequency 471000000.
[INFO] [DOCSIS.DS(pid=405)]: DS[1]: Locked on primary DS 471000000Hz.
[WARNING] [DOCSIS.DS(pid=405)]: Got SYNC-SA [00:17:10:9c:3c:86] but the MDD filter is disabled!
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[WARNING] [DOCSIS.MDD(pid=348)]: Invalid event type code - ignored.
[INFO] [DOCSIS.FREQ_SCAN(pid=351)]: MDD Received on primary DS 471000000Hz.
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID All]: UCD Collect on DS[1]...
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID All]: 8 UCDs Found; 8 UCDs ordered [UCIDs: 2 1 5 8 3 7 4 6].
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 2]: UCD Collect on DS[1]...
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 2]: UCD Found on DS[1] [change count 2].
[INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 2]: Start B-INIT-Ranging [sid 0] [tech 0]...
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=773)]: L2SWITCH_SetPortMode:2150 Port is already in requested mode, Port=RGMII0, mode=RGMII_100
[WARNING] [COMMON_COMPONENTS.L2SWITCH(pid=780)]: L2SWITCH_SetPortMode:2150 Port is already in requested mode, Port=RGMII0, mode=RGMII_1000
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: US[1] [UCID 2]: T3 Retries limit exceeded, no RNG-RSP.
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 1]: UCD Collect on DS[1]...
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 1]: UCD Found on DS[1] [change count 2].
[INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 1]: Start B-INIT-Ranging [sid 0] [tech 0]...
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: US[1] [UCID 1]: T3 Retries limit exceeded, no RNG-RSP.
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 5]: UCD Collect on DS[1]...
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 5]: UCD Found on DS[1] [change count 2].
[INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 5]: Start B-INIT-Ranging [sid 0] [tech 0]...
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: US[1] [UCID 5]: T3 Retries limit exceeded, no RNG-RSP.
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 8]: UCD Collect on DS[1]...
[INFO] [DOCSIS.UCD(pid=348)]: US[1] [UCID 8]: UCD Found on DS[1] [change count 2].
[INFO] [DOCSIS.US(pid=351)]: US[1] [UCID 8]: Start B-INIT-Ranging [sid 0] [tech 0]...
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb9 (46), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe2 (56), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x8a (34), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xb3 (44), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xdc (55), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0xe5 (57), startData.txAttr.freqOffset = 0x0
[INFO] [DOCSIS.US(pid=414)]: startData.txAttr.powerOffset = 0x61 (24), startData.txAttr.freqOffset = 0x0

[usajinshan]

Anybody share am1602 bitware1.5.0.9 bin file? thanks.

[bx8055]

your cert getting band it doesn't matter what firmware modem use