+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Finally I found the correct diagram fpr Dpc 2100 (/showthread.php?tid=74)
Finally I found the correct diagram fpr Dpc 2100 - Tyfon - 08-02-2009
Thanks guy's for the Diagrams I found on this site.
I finally was able to do a backup on the modem
I was abble to detect Amd xxxxxxxxx
read all and saved it.
I kept getting blackCat not connected.
Now I need to get it flashed.
Please advise if this is correct IN blackcat.
after I did my back up
clikc on tab Flash / write all /select haxorware11rev30.bin
i understand is the lates bin/ when complete
unhook ribbon cable then I'm done and reboot?
Did I miss any steps?
When I have the modem plug in with the power and cable
what do I do to the pc to get the modem going
do I go into CMD ipconfig /all
then realese
then renew
is this correct?
any other guide you may have or suggest.
Great forum with info and members to correct the problems
I had the modems down for two weeks because I had the wrong
wiring form other forum.
Why do I need the Factory tool
and how I use it.
Your help is appreciated.
Tyfon
RE: Finally I found the correct diagram fpr Dpc 2100 - rajkosto - 08-02-2009
use jtag utility and the instructions that come in the haxorware archive
RE: Finally I found the correct diagram fpr Dpc 2100 - Tyfon - 08-02-2009
Thank you for the reply Admin...
I will get on it.
Will be back.
Thanks again
TYfon
To program haxorware to your modem using JtagUtility, issue the following commands:
detect
ldram 9fc10000 {need help on this} do i type this in ?
(A File Open dialog will appear, find haxorware11rev30.bin and click open) program 9fc10000 130000
Tyfon
RE: Finally I found the correct diagram fpr Dpc 2100 - rajkosto - 09-02-2009
no, draw it on the monitor with a permanent marker
RE: Finally I found the correct diagram fpr Dpc 2100 - Tyfon - 23-02-2009
Okay Rajkosto,
I have restore the 2 modems that were dead using Jtag Utility.
I start it to to flash one of them with Haxoware3.0 What I need to know is how to get a mac in my area Florida USA I have read that I can share the mac with other people is this correct?
Any suggestion.
Thanks in advance.
Tyfon
RE: Finally I found the correct diagram fpr Dpc 2100 - rajkosto - 23-02-2009
what does getting macs have to do with HAXORWARE ?