+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Enable Ethernet connection (/showthread.php?tid=7045)
Enable Ethernet connection - babyoche - 17-02-2019
hello everyone I'm unable to ping this modem
I have been poking around a technicolor cisco modem
via serial console
I belive that the ethernet port is disable or only using ipv6 wich I don't know how to use
I'm trying to ping 192.168.100.10 or 192.168.0.1
I'm trying to download the certs from the modem to the computer like the cert or anything
tftp -r cm_key.bin -p 192.168.100.10
tftp: sendto: Network is unreachable
yes tftp64 is running
D3_1_cm_device_cert.cer cm_key.bin
D3_1_cm_device_prv_key.bin mfg_cert.cer
D3_1_device_ca_cert.cer production.ini
D3_1_root_ca_cert.cer root_pub_key.bin
cm_cert.cer
this is what I get when I do an ifconfig
adp0 Link encap:Ethernet HWaddr 00:50:F1:80:00:00
inet6 addr: fe80::250:f1ff:fe80:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:2000 Metric:1
RX packets:33 errors:0 dropped:0 overruns:0 frame:0
TX packets:39 errors:0 dropped:6 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13596 (13.2 KiB) TX bytes:19696 (19.2 KiB)
adp0.555 Link encap:Ethernet HWaddr 00:50:F1:80:00:00
inet addr:192.168.254.254 Bcast:192.168.254.255 Mask:255.255.255.0
inet6 addr: fe80::250:f1ff:fe80:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:2000 Metric:1
RX packets:33 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2016 (1.9 KiB) TX bytes:3326 (3.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:628 (628.0 B) TX bytes:628 (628.0 B)
this is what I get when I do a printenv
HZ=100
MALLOC_CHECK_=3
SHELL=/bin/sh
TERM=xterm
HUSHLOGIN=FALSE
OLDPWD=//nvram
USER=root
PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin
PWD=//nvram/itstore
EDITOR=/bin/vi
TZ=UTC
PS1=\u@\h:\w\$
SHLVL=1
HOME=/home/root
LOGNAME=root
_=/bin/printenv
I also have access to this
PUMA 7 B0 PLATFORM
Intel® Atom™ CPU CE2703 @ 1.28GHz 1.28 GHz
CGM2.86C.540507.R.1712201820 512 MB RAM
Continue This selection will
Select Language <en> direct the system to
> Boot Manager continue to booting
> Device Manager process
> Boot Maintenance Manager
^v=Move Highlight <Enter>/<Windows+Volv>=Select
/------------------------------------------------------------------------------\
| System Setup |
\------------------------------------------------------------------------------/
> Main
> Puma7 Configuration
> CPU Configuration
> Uncore Configuration
> South Cluster Configuration
> Boot
> Security Configuration
> Thermal
> System Component
> Debug Configuration
> Memory Configuration Options
> S5 Charging Configuration
Commit Changes and Exit
Discard Changes and Exit
v
/------------------------------------------------------------------------------\
| |
| ^v=Move Highlight <Enter>/<Windows+Volv>=Selectc>/<Windows+Vol^>=Exit |
\------------------------------------------------------------------------------/
I see no option to activate telnet or ssh
any help will be grately appresiated
RE: Enable Ethernet connection - Geno_Smith - 20-02-2019
what is the firmware running? Is it something with NOSH in it?
RE: Enable Ethernet connection - babyoche - 26-02-2019
Sorry I'm unable to ping the modem to neither
192.168.100.1
192.168.0.1
192.168.1.1
I think that it only work with ipv6, and I don't know how to work with that