can't get jtag utility to detect my sb5101 - Printable Version +- Haxorware Forums (http://www.haxorware.com/forums) +-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6) +--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7) +--- Thread: can't get jtag utility to detect my sb5101 (/showthread.php?tid=674)

can't get jtag utility to detect my sb5101 - i3en - 05-11-2010 I had a jtag from when i used to test on dn receivers. So I found the schematics here for the motorola sb5101 (thanks rajkosto) and I soldered the jtag to work with the sb5101 Here are some pics Ive used tom's jtag utility and some other one. But i can't get either to detect it. Ive tried pressing it hard with one hand while detecting, Ive tried flipping the connection. And nothing yet. Any Suggestions? Thanks i3en RE: can't get jtag utility to detect my sb5101 - drewmerc - 05-11-2010 if your not soldering the pins to the modem i find it helps to plug them in upside down (so the longer pins go thru the holes) also use a multimeter to test if the connection is working on all pins RE: can't get jtag utility to detect my sb5101 - i3en - 05-11-2010 i did check with my multimeter and all the pins are working fine. I tried it upside down like you said with no luck. is there any driver needed? I did order a jtag cable from ebay it should be arriving today. So if there is anything wrong with mine that should fix it. RE: can't get jtag utility to detect my sb5101 - drewmerc - 05-11-2010 the included io.sys needs a 32bit version of windows (only other thing i can think of) RE: can't get jtag utility to detect my sb5101 - i3en - 05-11-2010 alright i got the cable in the mail. This one seems to work better but now i get Read IDCODE: 0xfbffffff Manufacturer: 0x7ff Part: 0xbfff Version: 0xf that is in tom's jtag utility RE: can't get jtag utility to detect my sb5101 - ABMJR - 05-11-2010 Sounds/looks bricked. Head over to SBH and read more there