+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: General question about modems (/showthread.php?tid=616)
General question about modems - kvant0x - 24-09-2010
Hi, my cable network use Docsis 3.0 and Docsis 2.0 modems. Seems no Docsis 1.0 boxes anymore at all.
Config file on ISPs TFTP server is secured, it's not possible to get it without CM, and possibly other network security methods also enabled, BPI+
I can get many MAC addresses /device info of cable modems via snmp scan.
Will modified Motorola SB modems work in my network or there is no chances?
RE: General question about modems - drewmerc - 25-09-2010
all depends on if they let 2 modems with same mac on different nodes (99% do)
tho i think you'll need certs to go with the macs
RE: General question about modems - kvant0x - 25-09-2010
(25-09-2010, 12:11 AM)drewmerc Wrote: all depends on if they let 2 modems with same mac on different nodes (99% do)
tho i think you'll need certs to go with the macs
so MAC need be from a different node than my modem? The possible method is to find mac which have better speed plan and use it? How to use certs and how to get it?
RE: General question about modems - drewmerc - 25-09-2010
easyest way to get certs is dump them from a subbed modem (one with a faster config)
you can try getting them via snmp but this is isp dependant
RE: General question about modems - kvant0x - 25-09-2010
how to check that SNMP is enabled/disabled in my network? Also, how to check whether or not BPI+ auth is enforced on my system? After scanning nodes with netscan I can access cable modems web-interfaces with some helpful info.
The web menu on connectivity status of the modem show:
EAE status: Disable
BPI status: AUTH
tart, TEKtartThe other models on cable modem status page show info:
Cable Modem Certificate: Installed
RE: General question about modems - drewmerc - 25-09-2010
http://www.sbhacker.net/forum/index.php/topic/12188-cert-graber-v-15-vbnet/
RE: General question about modems - kvant0x - 25-09-2010
maybe there's other standalone tools, without .NET Framework requirement?
RE: General question about modems - drewmerc - 25-09-2010
maybe there is but then i have no problem with .net
(why do you?)
RE: General question about modems - kvant0x - 25-09-2010
just don't want install .Net on my old Pc, ok will try to find something.
it's only possible to grab certs from modems which are in factory mode? In order to be in factory mode, modem need to be in my local network?
RE: General question about modems - drewmerc - 25-09-2010
i had to install .net1.1 (so toms jtag would work) on a 64mb 200mhz crappy old laptop so i understand (but hell it worked.......... slowly)
honestly i have no idea better to ask on sbhacker as on my isp, snmp is disabled so only way for me to get them is dump them from a subbed modem