+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: I am so NEW at SB5101 (/showthread.php?tid=58)
I am so NEW at SB5101 - xdrstarx - 22-01-2009
I am kind lost at here. heh. I hope someone can help me with this step to step. Video tut is not really understand.
I am using Flash Write ALL for haxorware10rc6_DOCSIS, i using BlackCat build 128. its succeful write all and, i did put in Network dns 192.168.100.1, and
I am using two Modem running same time. Should i turn off modem, and keep hack modem running ? will it work or did i miss something step to step ?
it will be best if you want to talk me thur AIM ? - xdrstarx
Thanks Guys for your try help here.
RE: I am so NEW at SB5101 - xdrstarx - 24-01-2009
Finally set up Haxorware, why isn't anyone able to help me?
and also how do i get mac id or something to put in, it get to work internet. how do i do that ?
RE: I am so NEW at SB5101 - rajkosto - 25-01-2009
by reading sbhacker forum for your isp
also try the haynes modem guide so you can understand the basic concepts
why would we help you if you havent done your homework
why repeat something thats been said a 1000 times before
RE: I am so NEW at SB5101 - nintendo1889 - 13-11-2013
I bought a sb5101 1.0rc6 on ebay. Should I upgrade it to 1.1?
I'm on comcast in atlanta.
Could someone please post a link to the info since I don't see any sticky's or any guide or faqs.
Edit: ok, nevermind. I read the upgrade\instructions.txt file, quoted below. It's flashed already so I'll just leave it on 1.0rc6.
Quote:Upgrading from previous shelled firmware (infinite) or Haxorware 1.0
Set your computers ip to 192.168.100.10
Set up a TFTP server with haxorware11revXX-XXXX.bin in its root
Make sure the haxorware webgui isn't currently open
Connect to modem with hyperterminal or telnet to the IP 192.168.100.1
Enter your username and password
cd /ip
ipconfig 1 release
y
dload -i 1 -l -f 192.168.100.10 haxorware11revXX-XXXX.bin
y
cd /
reset
Haxorware 1.1 should now boot
Upgrading from Haxorware 1.1
Make sure the modem's cpu usage is low, so if it's currently scanning for downstream make it stop by going to the web shell and doing
cd /docsis
scan_stop
The safest time to do the Firmware Upgrade is when the modem is fully operational and online.
Then use the Firmware Upgrade page on the WebGUI, find haxorware11revXX-XXXX.bin and upload it to the modem in the Firmware section
Reboot the modem using the WebGUI or otherwise, and the new version of Haxorware should now boot
(25-01-2009, 07:50 AM)rajkosto Wrote: by reading sbhacker forum for your isp
also try the haynes modem guide so you can understand the basic concepts
why would we help you if you havent done your homework
why repeat something thats been said a 1000 times before
RE: I am so NEW at SB5101 - southernyankey1970 - 14-11-2013
Upgrade it through the Hax GUI and from personal experience I always disconnect the coax before I do that just to be safe. You don't have to, I just do it that way...
RE: I am so NEW at SB5101 - sixteen - 07-01-2014
no more free lunch.....
