Haxorware Forums
ch341a usb spi flasher SB6141 - Printable Version

+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: ch341a usb spi flasher SB6141 (/showthread.php?tid=4549)

Pages: 1 2

ch341a usb spi flasher SB6141 - hotboyt8903 - 17-03-2017

i purchased this spi flasher of amazon for 10 bucks now its hear and when i plug it up with a sop16 test clip it detects the MX25l6406E when i read the bin it seems corrupted and when i erase the chip it reads blank when i write to the chip it dosen't seem to take the whole process it seems like only half of it writes can someone help me out or does anyone have a full dump of the sb6141 so i can see it writes it successfully

RE: ch341a usb spi flasher SB6141 - Johnliang - 26-03-2017

I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.

RE: ch341a usb spi flasher SB6141 - modembricker - 27-03-2017

If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.

RE: ch341a usb spi flasher SB6141 - hotboyt8903 - 09-04-2017

(27-03-2017, 03:24 PM)modembricker Wrote: If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.

this is what i did

1st - i read the chip using soic 16 test clip while chip is still on board

2nd - the bin file in the ch341a usb software it dosen't read the dump

3rd - tried to flash the bin file back after erasing chip and ended up with a brick now i need the stock firmware for the modem since i bought the modem with forceware installed already

can you send me a dump of sb6141 please to my email or upload here i have the bin file from my dump mabey you can read it on your machine
(26-03-2017, 02:24 PM)Johnliang Wrote: I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.

what steps did you take?

RE: ch341a usb spi flasher SB6141 - Johnliang - 13-04-2017

The flashing steps of ch341a usb spi flasher to SB6141E:

To recognize the chip by the ch341a usb spi flasher shall be first of all;

1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

RE: ch341a usb spi flasher SB6141 - dragonboyy3k - 10-02-2019

(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks

RE: ch341a usb spi flasher SB6141 - JohnnyDgrs - 17-04-2020

(10-02-2019, 04:19 AM)dragonboyy3k Wrote:
(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.

RE: ch341a usb spi flasher SB6141 - enorozco - 03-08-2020

(17-04-2020, 11:31 PM)JohnnyDgrs Wrote:
(10-02-2019, 04:19 AM)dragonboyy3k Wrote:
(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
Programen con asflasher y asi escribe la flash completa no solo la mitad

RE: ch341a usb spi flasher SB6141 - TerrySlocum - 15-10-2020

(03-08-2020, 04:51 AM)enorozco Wrote:
(17-04-2020, 11:31 PM)JohnnyDgrs Wrote:
(10-02-2019, 04:19 AM)dragonboyy3k Wrote:
(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
Programen con asflasher y asi escribe la flash completa no solo la mitad

I am having the same issue can't connect CH341A

RE: ch341a usb spi flasher SB6141 - andy m - 18-10-2020

this will use get it working
.rar   CH341SER_drivers.rar (Size: 134.94 KB / Downloads: 104)
.rar   Colibri.rar (Size: 1.34 MB / Downloads: 116)
.zip   NeoProgrammer_2.1.0.19_1.zip (Size: 2.45 MB / Downloads: 117)
.zip   NeoProgrammer_2.1.0.19_1.zip (Size: 2.45 MB / Downloads: 117)
.rar   Colibri.rar (Size: 1.34 MB / Downloads: 116)
.rar   CH341SER_drivers.rar (Size: 134.94 KB / Downloads: 104)