+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: UBEE DVW32CB & DDW36C (/showthread.php?tid=4391)
UBEE DVW32CB & DDW36C - infinity08 - 20-11-2016
hey guys i have this two modems they both have a win bond 25Q128fvfg 16 pins , when i try to read them with Jtag NT i get nothing but fff with 3.3v or 5v using a ttl now when i removed then chips from the board and read them with jtag i could read them with no problem .
i know im reading 16mb but i dont think its the right 16mb flash because when i verify it give me failed so im not sure but at least i could read them also im using the 6120 script...
any body that has played with this modems that could help me please on whats the proper way to read them on the board
thanks
RE: UBEE DVW32CB & DDW36C - tazman44 - 22-03-2021
Same problem here , I think bin has to be protected somehow ! Every dump isn’t the same they are all different but If I program them and read verify the bin and the written bin check out the same but 98% on working modem ! I’m lost lol