How to scan MAC out of Node ? - Printable Version

How to scan MAC out of Node ? - Printable Version

+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: How to scan MAC out of Node ? (/showthread.php?tid=3987)

How to scan MAC out of Node ? - bleros - 08-06-2016

Hello how to scan mac out of my node? , i use FastSNMP but app stoped working not responding after 2hour scan i dont know why,

Thanks

RE: How to scan MAC out of Node ? - ricktendo - 08-06-2016

Try supersnmp

RE: How to scan MAC out of Node ? - bleros - 09-06-2016

(08-06-2016, 08:38 PM)ricktendo Wrote: Try supersnmp

Hi thanks which IP range to start scan public one?
thank

RE: How to scan MAC out of Node ? - neo_ - 12-06-2016

(09-06-2016, 01:51 AM)bleros Wrote:
(08-06-2016, 08:38 PM)ricktendo Wrote: Try supersnmp

Hi thanks which IP range to start scan public one?
thank

Yes, public. Always scan public.

RE: How to scan MAC out of Node ? - bleros - 12-06-2016

(12-06-2016, 07:02 AM)neo_ Wrote:
(09-06-2016, 01:51 AM)bleros Wrote:
(08-06-2016, 08:38 PM)ricktendo Wrote: Try supersnmp

Hi thanks which IP range to start scan public one?
thank

Yes, public. Always scan public.

according to whoer.net ip range i tested but with supersnmp nothing found tried with SNMPrape found router

""00 0C 42 FC A0 97""","=""(can't detect!)""","=""RouterOS RB751G-2HnD""","=""""","=""""","=""""","=""""","=""""","="""""
""00 0C 42 E5 26 63""","=""(can't detect!)""","=""RouterOS RB751U-2HnD""","=""""","=""""","=""""","=""""","=""""","="""""
""D4 CA 6D DA D9 E3""","=""(can't detect!)""","=""RouterOS RB951G-2HnD""","=""""","=""""","=""""","=""""","=""""","="""""

RE: How to scan MAC out of Node ? - rgvsxdigitalpimp - 13-06-2016

Never scan behind a router. Straight to modem

RE: How to scan MAC out of Node ? - bleros - 03-10-2016

Yes i scann direct wire from modem to pcc no router i cant find anything..

this day i got on worked MAC 15km away from my home i noticed upstream channel id was 1 and frequency 490....... while my upstream channel is 3 and frequency 434........ BTW mac worked but kicked me :S scanned some mac with dhcp sniffer got on mac is working fine is not kickin me immediately is taking some time maybe is working for 1 hour 2 and after that connection its drop. DOes this upstream id and frequency we have different node. ?

In my village i have this is mounted in center
[Image: HTB1YXXXFVXXXXbqXVXXq6xXFXXXq.jpg]

[Image: HTB1YXXXFVXXXXbqXVXXq6xXFXXXq.jpg]