+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: DCM425 will not accept Haxorware (/showthread.php?tid=2807)
DCM425 will not accept Haxorware - alane186 - 10-10-2013
I have a DCM425 in emergency mode. I have haxorware.bin in my tftp32 folder. Im using the one-click method, everything works but when it is time for the tftp transfer i get an error 10054 in tftp32.
Thompson event log:
Time Not Established Error (4) SW upgrade Failed after download - Incompatible SW file
Time Not Established Notice (6) SW Download INIT - Via NMS
Note: Firewall is off and i can can transfer UGM Bootloader with no problems, but no haxorware
Device:
Thomson DOCSIS Cable Modem <<HW_REV: 4.0; VENDOR: Thomson; BOOTR: 2.1.6d; SW_REV: ST52.10.11; MODEL: DCM425
OS: Winblows 7 ultimate 32bit
TFTP32 v4.00
IP: 192.168.100.10
Subnet: 255.255.255.0
Gateway: 192.168.100.1
RE: DCM425 will not accept Haxorware - drewmerc - 10-10-2013
well its a closed port error, flash via serial/ttl