ambit 250 max232 ttl set up help, - Printable Version +- Haxorware Forums (http://www.haxorware.com/forums) +-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6) +--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7) +--- Thread: ambit 250 max232 ttl set up help, (/showthread.php?tid=2610)

ambit 250 max232 ttl set up help, - boyley1984 - 24-06-2013 hi, can someone please show me the correct way to connect my ambit 250 to my max232 board max board # i have 4 wires blue, red, white, yellow. can you show me were to connect on ambit board as theres pins and i know ones isint used but not sure wich, RE: ambit 250 max232 ttl set up help, - drewmerc - 24-06-2013 what is the exact chip on your 232 board, is it MAX232EPE as this is a 5v chip and not the required 3.3v (really this is why i made the recommend tools sticky you could have save all the trouble and money) anyways data tx to txd-isp, data rx to rxd-isp, gnd(any) to gnd-isp, 3.3v not connected so power the max232 via an external 5v power supply interesting read http://www.dd-wrt.com/phpBB2/viewtopic.php?t=162332&postdays=0&postorder=asc&start=0 RE: ambit 250 max232 ttl set up help, - mollymac - 10-05-2015 I have order a RS232 To TTL Converter Module Serial Board MAX232CPE Input: 3.3V to 5V USB Power. Output: 5V. will this work? RE: ambit 250 max232 ttl set up help, - drewmerc - 10-05-2015 just buy a usb ttl cable off ebay http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR11.TRC2.A0.H0.Xusb+ttl.TRS0&_nkw=usb+ttl&_sacat=0 RE: ambit 250 max232 ttl set up help, - mollymac - 10-05-2015 I already have a cable..my broad seems to be broke, and ordered RS232 To TTL Converter Module Serial Board MAX232CPE my old chip was cpe