+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Getting Back to Stock 5100 ONLINE Light Blinking (/showthread.php?tid=2599)
Getting Back to Stock 5100 ONLINE Light Blinking - TCNisogotbusted - 19-06-2013
So about a year ago i was determind to figure this whole modding thing with a 5100 i bought at the thrift store. So i flashed it with sigma x 106 tried to figure all of it out and threw my hands in the air and gave up. So Now i have a paid subscription to comcast i flashed it to nosh 1.1.1.1 or whatever which i assume is stock. didn't flash the bootloader so does that matter because i called them up and my online light keeps blinking. i registered my mac with them and i am connected to the network so its not a physical issue. i have original files but old schwarkatz isnt reading my original dump. Its been a long time since i messed with this stuff so noob question. Or if i did end up using a CF which should i use. I will want to throttle my speeds eventually if its even possible Thanks in advance
RE: Getting Back to Stock 5100 ONLINE Light Blinking - drewmerc - 19-06-2013
katz, try using toms anyways i'll guess your certs are fucked, i'd suggest you extract them from your original dump
RE: Getting Back to Stock 5100 ONLINE Light Blinking - TCNisogotbusted - 22-06-2013
1970-01-01 00:01:34 3-Critical 0x0501BD64 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:28 3-Critical 0x0501BDC8 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:36 3-Critical 0x0501BE90 SYNC Timing Synchronization failure - Failed to receive MAC SYNC frame within time-out period
1970-01-01 00:01:38 3-Critical 0x05110008 UCD invalid or channel unusable
1970-01-01 00:01:41 3-Critical 0x04E33948 No Ranging Response received - T3 time-out
1970-01-01 00:02:00 3-Critical 0x040D9964 DHCP FAILED - Discover sent, no offer received
1970-01-01 00:01:48 4-Error 0x040D9A93 ToD request sent- No Response received
1970-01-01 00:01:50 3-Critical 0x045A8148 TLV-11 - Illegal Set operation failed
1970-01-01 00:01:50 5-Warning 0x03EF8A1C Auth Reject - Permanent Authorization Failure
2013-06-18 20:30:44 3-Critical 0x0501BEF4 SYNC Timing Synchronization failure - Loss of Sync
1970-01-01 00:01:39 7-Information 0x848E0006 T501.0 Acquired Downstream (573000000 Hz)........ SUCCESS
1970-01-01 00:01:45 7-Information 0x848E0005 T500.0 Acquired Upstream .......... SUCCESS
1970-01-01 00:01:48 7-Information 0x848E0003 D511.0 Retrieved DHCP .......... SUCCESS
1970-01-01 00:01:50 7-Information 0x848E0002 D509.0 Retrieved TFTP Config d11_m_sb5100_silver_c01.cm SUCCESS
2013-06-22 11:25:49 7-Information 0x848E0001 D507.0 Retrieved Time....... SUCCESS
PLease elaborate
RE: Getting Back to Stock 5100 ONLINE Light Blinking - southernyankey1970 - 22-06-2013
Certs are toast!
Warning 0x03EF8A1C Auth Reject - Permanent Authorization Failure
LOL I haven't seen that one since BPI+ became standard 3 years ago..
reflash the stock dump i know you don't have...lolol
or get a new dump to play with. You will need to get another stock flash and reflash it then call CC and have them reprovision your new flash to your account. After that works out for you, Do not touch your newly subbed modem again until you know what you are doing. Go to the flea market and buy another cm to play with...
RE: Getting Back to Stock 5100 ONLINE Light Blinking - ABMJR - 22-06-2013
So simple to fix...