+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Hax1.1r39 5101 Can anyone help? (/showthread.php?tid=2566)
Hax1.1r39 5101 Can anyone help? - vexone - 27-05-2013
Hello,
Very new, but quick learner. If there's anybody out there.... I'm drowning. VHF/UHF radio wannabe in need of assistance. Pls HELLLP
2013-05-27 15:41:39 Information T500.0 Acquired Upstream .......... SUCCESS
2013-05-27 15:41:32 Critical R002.0 No Ranging Response received - T3 time-out (US 10)
2013-05-27 15:41:30 Information T501.0 Acquired Downstream (297000000 Hz)........ SUCCESS
2013-05-27 15:41:26 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2013-05-27 15:41:26 Information Registration failure, re-scanning downstream
2013-05-27 15:41:25 Information D507.0 Retrieved Time....... SUCCESS
2013-05-27 15:41:22 Information D509.0 Retrieved TFTP Config ?BBgdiTgACA1yaE4KQa6Q@CkGukGDSumiLrk6YUZqgV5D3xpNn4jBI SUC
2013-05-27 15:41:22 Information D511.0 Retrieved DHCP .......... SUCCESS
2013-05-27 15:41:22 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
RE: Hax1.1r39 5101 Can anyone help? - southernyankey1970 - 27-05-2013
REG-RSP response code NOT ok! rsp code = 8
research that...
RE: Hax1.1r39 5101 Can anyone help? - drewmerc - 27-05-2013
you need to take the firmware update from your isp before installing hax
RE: Hax1.1r39 5101 Can anyone help? - vexone - 28-05-2013
(27-05-2013, 11:53 PM)southernyankey1970 Wrote: REG-RSP response code NOT ok! rsp code = 8
research that...
Will do! Thanks for pointing me in the right direction!
RE: Hax1.1r39 5101 Can anyone help? - vexone - 02-06-2013
(27-05-2013, 11:57 PM)drewmerc Wrote: you need to take the firmware update from your isp before installing haxhello ,
im guessing i need to follow http://www.haxorware.com/forums/thread-950-page-3.html
to get back to stock (keep receiving program header for this image errors) but do i need to sub to receive update?
RE: Hax1.1r39 5101 Can anyone help? - sixteen - 02-06-2013
(02-06-2013, 05:08 PM)vexone Wrote:Dude what so hard to understand? right back the original stock to the modem connect it to the cable line in your house let it sit for a wail and take the update from you cable company then right haxorware to it. What isp is this?(27-05-2013, 11:57 PM)drewmerc Wrote: you need to take the firmware update from your isp before installing haxhello ,
im guessing i need to follow http://www.haxorware.com/forums/thread-950-page-3.html
to get back to stock (keep receiving program header for this image errors) but do i need to sub to receive update?
RE: Hax1.1r39 5101 Can anyone help? - southernyankey1970 - 02-06-2013
well, in his defense, if his ISP has their shit together it isn't that easy. If they have clone detection running correctly then that cm will sit in the stream for a year and never get a push from the CMTS.
Op, do this...
You can either uncheck everything in hax settings page and uncheck disable snmp in stealth page and reconnect the coax.
or
preferrably you would want to reflash the stock backup of the virgin firmware you made before you flashed it, but if you do not have it then try this,
Take that nonvol and write it over another stock flash and connect it. That might get you there. It all depends on how their cmts is configured. Try those two things first.
RE: Hax1.1r39 5101 Can anyone help? - vexone - 03-06-2013
(02-06-2013, 11:22 PM)southernyankey1970 Wrote: well, in his defense, if his ISP has their shit together it isn't that easy. If they have clone detection running correctly then that cm will sit in the stream for a year and never get a push from the CMTS.
Op, do this...
You can either uncheck everything in hax settings page and uncheck disable snmp in stealth page and reconnect the coax.
or
preferrably you would want to reflash the stock backup of the virgin firmware you made before you flashed it, but if you do not have it then try this,
Take that nonvol and write it over another stock flash and connect it. That might get you there. It all depends on how their cmts is configured. Try those two things first.
Thank you, sir. Will do it in the order suggested.
TW@jamaicaqny
RE: Hax1.1r39 5101 Can anyone help? - southernyankey1970 - 04-06-2013
LOL
My dad is a sir...
We all have to learn and this hobby is quickly becoming more trouble than it is worth in my area. Hope that helps you a little op...