+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: SB5102E usbjtagnt need Help! (/showthread.php?tid=1620)
SB5102E usbjtagnt need Help! - nimir - 07-06-2012
hi,
i have the sb5102 ,can´t flash it with haxorware or others! i detect this=
-flshdct 0
Found Address= 00000000 25FL0162A
-ldram flash
-erase flash
Address or size should be on the boundary of a flash
-sprogram flash
Address or size should be on the boundary of a flash
*Modem have no lights...all out.
Please need your help!
Thank You
RE: SB5102E usbjtagnt need Help! - drewmerc - 07-06-2012
Use comamand
erase 0 200000
and
sprogram 0 200000
RE: SB5102E usbjtagnt need Help! - nimir - 07-06-2012
(07-06-2012, 10:05 PM)drewmerc Wrote: Use comamandthank You..i tried it but i dont have any backup for the sb5102 because it was at the begin not possible to get backup and to save it!.can you please give me more details how to debrick it or how to flash it.i use the programmer version USB JTAG NT 0.57 and also UJModem 0,25b.
erase 0 200000
and
sprogram 0 200000
many thanks
RE: SB5102E usbjtagnt need Help! - drewmerc - 07-06-2012
well as you have no backup just flash it with a 2mb dump using program 0 200000 or sprogram 0 200000 (any 2mb dump of haxor diag r39 will do (or google for a 2mb 5102 dump)
if you have not already overwritten your stock firm just back it up with getram 0 200000 save 0 200000 (if memory serves)
RE: SB5102E usbjtagnt need Help! - nimir - 08-06-2012
(07-06-2012, 11:00 PM)drewmerc Wrote: well as you have no backup just flash it with a 2mb dump using program 0 200000 or sprogram 0 200000 (any 2mb dump of haxor diag r39 will do (or google for a 2mb 5102 dump)when i program 0 200000 the programmer do ca.90% then stop!
if you have not already overwritten your stock firm just back it up with getram 0 200000 save 0 200000 (if memory serves)
Thank you
RE: SB5102E usbjtagnt need Help! - drewmerc - 08-06-2012
i think the last 10% is just the event log so it should not matter (i could be wrong)