dpc modem 2100r2 firmware upgrade - Printable Version +- Haxorware Forums (http://www.haxorware.com/forums) +-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6) +--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7) +--- Thread: dpc modem 2100r2 firmware upgrade (/showthread.php?tid=1457)

dpc modem 2100r2 firmware upgrade - subhani - 02-03-2012 dear sir, i have dpc2100r2 modem and i flash it with dpc2100r2 without cable software and i also successful to install haxorware software but sir i thiink there is some problem with my modem and i need to again flash with my modem without cable software so i need your help that what am i doing if i again reflash to my modem with this dpc2100r2 without cable software if it is possible so how to flash it again because i flash it again but its run command shows that 192.168.100.1 is not response please help me thanks RE: dpc modem 2100r2 firmware upgrade - drewmerc - 02-03-2012 so is haxor installed on this modem or not? RE: dpc modem 2100r2 firmware upgrade - subhani - 02-03-2012 yes its installed now but its work two or three days and now its shows only ranging i always change physical mac address its run only one day and now its on only shown ranging i always tried to several mac changing but not succeded RE: dpc modem 2100r2 firmware upgrade - drewmerc - 02-03-2012 so why do you want to reflash it? thats not going to fix it but nether the less why not just use haxorware's webpage to flash it? RE: dpc modem 2100r2 firmware upgrade - subhani - 03-03-2012         dear sir my modem always shows ranging and look its event log status and dhcp lease and expire date please help me what am i doing and sir please send me max 232 for com port circuit diagram for flashing webstar dpc2100r2 modem thanks i attached these jpg for event log and dhcp RE: dpc modem 2100r2 firmware upgrade - drewmerc - 03-03-2012 event logs are useless only telnet logs contain any useful information but even as i'm writing that you have the bigger issue of it ranging, i'd extract a nonvol from a subbed modem and upload that and see if it get's an initial lock RE: dpc modem 2100r2 firmware upgrade - subhani - 05-03-2012 dear sir, thanks for ur help me but sir there is my cable joint and cable adaptor problem so whenever i change my cable connector so its operational so i am be very thankful you your replys RE: dpc modem 2100r2 firmware upgrade - ABMJR - 05-03-2012 Ranging means new security.. Downstream always locks, fails in the handshake RE: dpc modem 2100r2 firmware upgrade - southernyankey1970 - 05-03-2012 change your nic mac with every new modem mac.. god where do you live that you can still do that? you must have been upgraded to d3 recently. Read up on bpi. RE: dpc modem 2100r2 firmware upgrade - ABMJR - 05-03-2012 Wow... Easy solution... but, I dont work here and dont help modems go on-line that have new security.. Peace