DPC2100R2 HELP !!!!!!!! - Printable Version +- Haxorware Forums (http://www.haxorware.com/forums) +-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6) +--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7) +--- Thread: DPC2100R2 HELP !!!!!!!! (/showthread.php?tid=1132) |
DPC2100R2 HELP !!!!!!!! - S1rchpwns - 26-11-2011 I need help im trying to figure out which cable is the correct one and best one so i can flash my dpc2100r2 cable modem and connect to my computer i already solder 8 pin header to the cable modem please post links or pics thank you would also like to know which programs i can use with certain cables RE: DPC2100R2 HELP !!!!!!!! - drewmerc - 26-11-2011 the 8 pin header(j221) is jtag and can be programmed by toms or any jtag software, the undersized 4 pin header(con2) is serial ttl for use with putty or any other telnet program RE: DPC2100R2 HELP !!!!!!!! - S1rchpwns - 26-11-2011 can u send me some links off ebay so i can buy cables right now thank you in advance RE: DPC2100R2 HELP !!!!!!!! - drewmerc - 26-11-2011 ttl cable link http://www.ebay.com/sch/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A5551&rt=nc&_nkw=usb+ttl&_sticky=1&_trksid=p3286.c0.m14&_sop=15&_sc=1 jtag make your own (skip the resistors just keep cable short under 6") RE: DPC2100R2 HELP !!!!!!!! - S1rchpwns - 26-11-2011 so lets say i bought a modem off ebay the webby stock firmware i have to make a jtag cable since i cant telnet because its never been flashed ? after i flash can i use putty on this modem ? last question how do i connect the ttl cable to the modem ? RE: DPC2100R2 HELP !!!!!!!! - drewmerc - 26-11-2011 if it's an old webby try the 1 click installer, if that fails you can use a ttl cable(con2) and use the p option in the bootloader to install, jtag if it's what you have RE: DPC2100R2 HELP !!!!!!!! - S1rchpwns - 26-11-2011 (26-11-2011, 03:34 PM)drewmerc Wrote: if it's an old webby try the 1 click installer, if that fails you can use a ttl cable(con2) and use the p option in the bootloader to install, jtag if it's what you have which program is the 1 click installer how does that one work i also heard i can install through ethernet how can i install through ethernet RE: DPC2100R2 HELP !!!!!!!! - drewmerc - 26-11-2011 the 1 click installer is just a bat script of local snmp commands that installs haxorware via ethernet http://www.haxorware.com/forums/attachment.php?aid=166 RE: DPC2100R2 HELP !!!!!!!! - S1rchpwns - 27-11-2011 Im trying to do the one click installer with the batch file it says press any key to continue after that all i keep getting is timeout no response from 192.168.100.1 RE: DPC2100R2 HELP !!!!!!!! - drewmerc - 27-11-2011 have you set a static ip and unplugged the coax |