Haxorware Forums
Sb5100 - Printable Version

+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Sb5100 (/showthread.php?tid=1114)

Sb5100 - kieth829 - 19-11-2011

I extract nonvol from my sub sb5100, and then upload to a sb5101 which has haxorware firmware. But sb5101 cant even lock the frequency. Do you guys know whats the problem? Somthings wrong with the nonvol from sb5100?

RE: Sb5100 - drewmerc - 19-11-2011

how did you extract the nonvol?
try extracting the certs from the nonvol with cmnonexp and injecting them manually

RE: Sb5100 - kieth829 - 19-11-2011

I extract the cfg.bin by Jtag, and then upload in haxorware in restore setion, is that correct? By the way, how can I extract the cert from cfg.bin? Is there a sofeware that I can use?

RE: Sb5100 - drewmerc - 19-11-2011

http://www.haxorware.com/forums/thread-879-post-4611.html#pid4611

RE: Sb5100 - kieth829 - 19-11-2011

Now I insert cert which extract from CFG.bin, after that I can lock the frequency and get to operation.....but the modem freeze after several seconds....my Bpi setting is Bpi+bypass or disable. If I set it to Bpi+1.0 or Bpi+1.1, it will stop at registration and not go to operational...Am I still missing something?

RE: Sb5100 - drewmerc - 19-11-2011

post a telnet log

RE: Sb5100 - kieth829 - 19-11-2011

It seems I lack of some basic technics.....sorry .....but I just dont know how to obtain a telnet log.....

RE: Sb5100 - drewmerc - 20-11-2011

Before you start, download and install putty:
http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe

Method 1 is preferred in all cases, method 2 looks worse than it is lol.


Method 1) Using MAX232

Remove power from the modemConnect your MAX232 adapter to the modem header and the PC. This guide assumes you're using COM1.

Open Putty. Click the logging section of the settings panel. Select the following options:

Session logging: All session output
Click 'browse' and browse to your desktop folder.
Filename: putty.txt
'Always overwrite it'
Untick 'flush log file frequently'

Click back onto the 'session' section of the settings panel:

Connection type: Serial
Serial line: COM1
Speed: 115200
Close window on exit: Never

Click 'open', then plug the power into the modem.
You should see the boot process and connection attempt appear.

Wait for about 20s after the connection has reached the failure point, then close putty and it'll save the txt log as putty.txt on your desktop.


Method 2) Using ethernet or USB (USB requires that USB drivers are correctly installed)

Remove power from the modem.

Set manual NIC IP 192.168.100.10.

Open Putty. Click the 'session' section of the settings panel:

Connection type: Telnet
Host Name: 192.168.100.1
Port: 23
Close window on exit: Never

Power up the modem. Wait 15 seconds, then click 'open' in putty.
Enter username and password, press enter.

Ignore any crap coming up in the window, it may look like you can't type but you can. May help if you just don't look at the screen

Type this, pressing enter at the end of each line:

cd doc
up_dis

cd /
cd n/b
auto_console 1
write

Note: The lines above are correct for modems based on the BCM3349 (A250/A255/A256/SB5101/Webstar 2100). If you're using a BCM3348 modem (A200/SB5100) the line 'cd n/b' changes to 'cd n/c'.

This tells the modem to halt at the console. Close putty and reboot modem using power cable.

When you reboot it, it won't try to connect at first, so you have time to set putty to log all console output to txt before connecting.


Open Putty. Click the logging section of the settings panel. Select the following options:

Session logging: All session output
Click 'browse' and browse to your desktop folder.
Filename: putty.txt
'Always overwrite it'
Untick 'flush log file frequently'

Click back onto the 'session' section of the settings panel:

Connection type: Telnet
Host Name: 192.168.100.1
Port: 23
Close window on exit: Never


Click 'open', enter username and password and press enter. Type 'run' and press enter. The modem will try to connect.

Wait for about 20s after the connection has reached the failure point, then close putty and it'll save the txt log as putty.txt on your desktop.

Once you've finished you'll need to set auto_console back to 0 in telnet, or you'll have to type 'run' every time you reboot modem.


RE: Sb5100 - kieth829 - 20-11-2011

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.11.20 00:54:12 =~=~=~=~=~=~=~=~=~=~=~=

tftp-enforce bypass is DISABLED
Storing received cfg of size 5524 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address =
Server Port Number = 69
Total Blocks Read = 11
Total Bytes Read = 5524

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 -> 0.0.0.0
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.1 -> phsrctac
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 2 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.1 -> @
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.2 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.2 -> 0.0.0.0
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.2 -> mamgafds
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.2 -> @
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.6.3.0 -> 2 (i32)
TLV-11[14]: 1.3.6.1.2.1.69.1.6.4.1.2.1 -> 4 (i32)
TLV-11[15]: 1.3.6.1.2.1.69.1.6.4.1.3.1 -> 2 (i32)
TLV-11[16]: 1.3.6.1.2.1.69.1.6.4.1.4.1 -> 1 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.6.4.1.5.1 -> 1 (i32)
TLV-11[18]: 1.3.6.1.2.1.69.1.6.4.1.6.1 -> 2 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.6.4.1.7.1 -> 0.0.0.0
TLV-11[20]: 1.3.6.1.2.1.69.1.6.4.1.8.1 -> 0.0.0.0
TLV-11[21]: 1.3.6.1.2.1.69.1.6.4.1.9.1 -> 98.139.220.0
TLV-11[22]: 1.3.6.1.2.1.69.1.6.4.1.10.1 -> 255.255.254.0
TLV-11[23]: 1.3.6.1.2.1.69.1.6.4.1.11.1 -> 6 (i32)
TLV-11[24]: 1.3.6.1.2.1.69.1.6.4.1.12.1 -> 0 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.4.1.13.1 -> 65535 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.4.1.14.1 -> 25 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.4.1.15.1 -> 25 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.4.1.2.2 -> 4 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.4.1.3.2 -> 2 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.4.1.4.2 -> 1 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.4.1.5.2 -> 1 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.4.1.6.2 -> 2 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.4.1.7.2 -> 0.0.0.0
TLV-11[34]: 1.3.6.1.2.1.69.1.6.4.1.8.2 -> 0.0.0.0
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.9.2 -> 67.195.22.0
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.10.2 -> 255.255.254.0
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.11.2 -> 6 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.12.2 -> 0 (i32)
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.13.2 -> 65535 (i32)
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.14.2 -> 25 (i32)
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.15.2 -> 25 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.2.3 -> 4 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.3.3 -> 2 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.4.3 -> 1 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.5.3 -> 1 (i32)
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.6.3 -> 2 (i32)
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.7.3 -> 0.0.0.0
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.8.3 -> 0.0.0.0
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.9.3 -> 206.190.36.0
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.10.3 -> 255.255.254.0
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.11.3 -> 6 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.12.3 -> 0 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.13.3 -> 65535 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.14.3 -> 25 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.15.3 -> 25 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.2.4 -> 4 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.3.4 -> 2 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.4.4 -> 1 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.5.4 -> 1 (i32)
TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.6.4 -> 2 (i32)
TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.7.4 -> 0.0.0.0
TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.8.4 -> 0.0.0.0
TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.9.4 -> 66.218.94.0
TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.10.4 -> 255.255.255.0
TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.11.4 -> 6 (i32)
TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.12.4 -> 0 (i32)
TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.13.4 -> 65535 (i32)
TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.14.4 -> 25 (i32)
TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.15.4 -> 25 (i32)
TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.2.5 -> 4 (i32)
TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.3.5 -> 1 (i32)
TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.4.5 -> 1 (i32)
TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.5.5 -> 1 (i32)
TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.6.5 -> 2 (i32)
TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.7.5 -> 0.0.0.0
TLV-11[76]: 1.3.6.1.2.1.69.1.6.4.1.8.5 -> 0.0.0.0
TLV-11[77]: 1.3.6.1.2.1.69.1.6.4.1.9.5 -> 0.0.0.0
TLV-11[78]: 1.3.6.1.2.1.69.1.6.4.1.10.5 -> 0.0.0.0
TLV-11[79]: 1.3.6.1.2.1.69.1.6.4.1.11.5 -> 6 (i32)
TLV-11[80]: 1.3.6.1.2.1.69.1.6.4.1.12.5 -> 0 (i32)
TLV-11[81]: 1.3.6.1.2.1.69.1.6.4.1.13.5 -> 65535 (i32)
TLV-11[82]: 1.3.6.1.2.1.69.1.6.4.1.14.5 -> 25 (i32)
TLV-11[83]: 1.3.6.1.2.1.69.1.6.4.1.15.5 -> 25 (i32)
TLV-11[84]: 1.3.6.1.2.1.69.1.6.4.1.2.6 -> 4 (i32)
TLV-11[85]: 1.3.6.1.2.1.69.1.6.4.1.3.6 -> 1 (i32)
TLV-11[86]: 1.3.6.1.2.1.69.1.6.4.1.4.6 -> 0 (i32)
TLV-11[87]: 1.3.6.1.2.1.69.1.6.4.1.5.6 -> 3 (i32)
TLV-11[88]: 1.3.6.1.2.1.69.1.6.4.1.6.6 -> 2 (i32)
TLV-11[89]: 1.3.6.1.2.1.69.1.6.4.1.7.6 -> 0.0.0.0
TLV-11[90]: 1.3.6.1.2.1.69.1.6.4.1.8.6 -> 0.0.0.0
TLV-11[91]: 1.3.6.1.2.1.69.1.6.4.1.9.6 -> 0.0.0.0
TLV-11[92]: 1.3.6.1.2.1.69.1.6.4.1.10.6 -> 0.0.0.0
TLV-11[93]: 1.3.6.1.2.1.69.1.6.4.1.11.6 -> 6 (i32)
TLV-11[94]: 1.3.6.1.2.1.69.1.6.4.1.12.6 -> 0 (i32)
TLV-11[95]: 1.3.6.1.2.1.69.1.6.4.1.13.6 -> 65535 (i32)
TLV-11[96]: 1.3.6.1.2.1.69.1.6.4.1.14.6 -> 137 (i32)
TLV-11[97]: 1.3.6.1.2.1.69.1.6.4.1.15.6 -> 139 (i32)
TLV-11[98]: 1.3.6.1.2.1.69.1.6.4.1.2.7 -> 4 (i32)
TLV-11[99]: 1.3.6.1.2.1.69.1.6.4.1.3.7 -> 1 (i32)
TLV-11[100]: 1.3.6.1.2.1.69.1.6.4.1.4.7 -> 0 (i32)
TLV-11[101]: 1.3.6.1.2.1.69.1.6.4.1.5.7 -> 3 (i32)
TLV-11[102]: 1.3.6.1.2.1.69.1.6.4.1.6.7 -> 2 (i32)
TLV-11[103]: 1.3.6.1.2.1.69.1.6.4.1.7.7 -> 0.0.0.0
TLV-11[104]: 1.3.6.1.2.1.69.1.6.4.1.8.7 -> 0.0.0.0
TLV-11[105]: 1.3.6.1.2.1.69.1.6.4.1.9.7 -> 0.0.0.0
TLV-11[106]: 1.3.6.1.2.1.69.1.6.4.1.10.7 -> 0.0.0.0
TLV-11[107]: 1.3.6.1.2.1.69.1.6.4.1.11.7 -> 17 (i32)
TLV-11[108]: 1.3.6.1.2.1.69.1.6.4.1.12.7 -> 0 (i32)
TLV-11[109]: 1.3.6.1.2.1.69.1.6.4.1.13.7 -> 65535 (i32)
TLV-11[110]: 1.3.6.1.2.1.69.1.6.4.1.14.7 -> 137 (i32)
TLV-11[111]: 1.3.6.1.2.1.69.1.6.4.1.15.7 -> 139 (i32)
TLV-11[112]: 1.3.6.1.2.1.69.1.6.4.1.2.8 -> 4 (i32)
TLV-11[113]: 1.3.6.1.2.1.69.1.6.4.1.3.8 -> 1 (i32)
TLV-11[114]: 1.3.6.1.2.1.69.1.6.4.1.4.8 -> 0 (i32)
TLV-11[115]: 1.3.6.1.2.1.69.1.6.4.1.5.8 -> 3 (i32)
TLV-11[116]: 1.3.6.1.2.1.69.1.6.4.1.6.8 -> 2 (i32)
TLV-11[117]: 1.3.6.1.2.1.69.1.6.4.1.7.8 -> 0.0.0.0
TLV-11[118]: 1.3.6.1.2.1.69.1.6.4.1.8.8 -> 0.0.0.0
TLV-11[119]: 1.3.6.1.2.1.69.1.6.4.1.9.8 -> 0.0.0.0
TLV-11[120]: 1.3.6.1.2.1.69.1.6.4.1.10.8 -> 0.0.0.0
TLV-11[121]: 1.3.6.1.2.1.69.1.6.4.1.11.8 -> 6 (i32)
TLV-11[122]: 1.3.6.1.2.1.69.1.6.4.1.12.8 -> 0 (i32)
TLV-11[123]: 1.3.6.1.2.1.69.1.6.4.1.13.8 -> 65535 (i32)
TLV-11[124]: 1.3.6.1.2.1.69.1.6.4.1.14.8 -> 445 (i32)
TLV-11[125]: 1.3.6.1.2.1.69.1.6.4.1.15.8 -> 445 (i32)
TLV-11[126]: 1.3.6.1.2.1.69.1.6.4.1.2.9 -> 4 (i32)
TLV-11[127]: 1.3.6.1.2.1.69.1.6.4.1.3.9 -> 1 (i32)
TLV-11[128]: 1.3.6.1.2.1.69.1.6.4.1.4.9 -> 0 (i32)
TLV-11[129]: 1.3.6.1.2.1.69.1.6.4.1.5.9 -> 3 (i32)
TLV-11[130]: 1.3.6.1.2.1.69.1.6.4.1.6.9 -> 2 (i32)
TLV-11[131]: 1.3.6.1.2.1.69.1.6.4.1.7.9 -> 0.0.0.0
TLV-11[132]: 1.3.6.1.2.1.69.1.6.4.1.8.9 -> 0.0.0.0
TLV-11[133]: 1.3.6.1.2.1.69.1.6.4.1.9.9 -> 0.0.0.0
TLV-11[134]: 1.3.6.1.2.1.69.1.6.4.1.10.9 -> 0.0.0.0
TLV-11[135]: 1.3.6.1.2.1.69.1.6.4.1.11.9 -> 17 (i32)
TLV-11[136]: 1.3.6.1.2.1.69.1.6.4.1.12.9 -> 0 (i32)
TLV-11[137]: 1.3.6.1.2.1.69.1.6.4.1.13.9 -> 65535 (i32)
TLV-11[138]: 1.3.6.1.2.1.69.1.6.4.1.14.9 -> 445 (i32)
TLV-11[139]: 1.3.6.1.2.1.69.1.6.4.1.15.9 -> 445 (i32)
TLV-11[140]: 1.3.6.1.2.1.69.1.6.4.1.2.10 -> 4 (i32)
TLV-11[141]: 1.3.6.1.2.1.69.1.6.4.1.3.10 -> 1 (i32)
TLV-11[142]: 1.3.6.1.2.1.69.1.6.4.1.4.10 -> 1 (i32)
TLV-11[143]: 1.3.6.1.2.1.69.1.6.4.1.5.10 -> 1 (i32)
TLV-11[144]: 1.3.6.1.2.1.69.1.6.4.1.6.10 -> 2 (i32)
TLV-11[145]: 1.3.6.1.2.1.69.1.6.4.1.7.10 -> 0.0.0.0
TLV-11[146]: 1.3.6.1.2.1.69.1.6.4.1.8.10 -> 0.0.0.0
TLV-11[147]: 1.3.6.1.2.1.69.1.6.4.1.9.10 -> 10.0.0.0
TLV-11[148]: 1.3.6.1.2.1.69.1.6.4.1.10.10 -> 255.0.0.0
TLV-11[149]: 1.3.6.1.2.1.69.1.6.4.1.11.10 -> 256 (i32)
TLV-11[150]: 1.3.6.1.2.1.69.1.6.4.1.12.10 -> 0 (i32)
TLV-11[151]: 1.3.6.1.2.1.69.1.6.4.1.13.10 -> 65535 (i32)
TLV-11[152]: 1.3.6.1.2.1.69.1.6.4.1.14.10 -> 0 (i32)
TLV-11[153]: 1.3.6.1.2.1.69.1.6.4.1.15.10 -> 65535 (i32)
TLV-11[154]: 1.3.6.1.2.1.69.1.6.4.1.2.11 -> 4 (i32)
TLV-11[155]: 1.3.6.1.2.1.69.1.6.4.1.3.11 -> 1 (i32)
TLV-11[156]: 1.3.6.1.2.1.69.1.6.4.1.4.11 -> 1 (i32)
TLV-11[157]: 1.3.6.1.2.1.69.1.6.4.1.5.11 -> 1 (i32)
TLV-11[158]: 1.3.6.1.2.1.69.1.6.4.1.6.11 -> 2 (i32)
TLV-11[159]: 1.3.6.1.2.1.69.1.6.4.1.7.11 -> 0.0.0.0
TLV-11[160]: 1.3.6.1.2.1.69.1.6.4.1.8.11 -> 0.0.0.0
TLV-11[161]: 1.3.6.1.2.1.69.1.6.4.1.9.11 -> 172.16.0.0
TLV-11[162]: 1.3.6.1.2.1.69.1.6.4.1.10.11 -> 255.240.0.0
TLV-11[163]: 1.3.6.1.2.1.69.1.6.4.1.11.11 -> 256 (i32)
TLV-11[164]: 1.3.6.1.2.1.69.1.6.4.1.12.11 -> 0 (i32)
TLV-11[165]: 1.3.6.1.2.1.69.1.6.4.1.13.11 -> 65535 (i32)
TLV-11[166]: 1.3.6.1.2.1.69.1.6.4.1.14.11 -> 0 (i32)
TLV-11[167]: 1.3.6.1.2.1.69.1.6.4.1.15.11 -> 65535 (i32)
TLV-11[168]: 1.3.6.1.2.1.69.1.6.4.1.2.12 -> 4 (i32)
TLV-11[169]: 1.3.6.1.2.1.69.1.6.4.1.3.12 -> 1 (i32)
TLV-11[170]: 1.3.6.1.2.1.69.1.6.4.1.4.12 -> 1 (i32)
TLV-11[171]: 1.3.6.1.2.1.69.1.6.4.1.5.12 -> 1 (i32)
TLV-11[172]: 1.3.6.1.2.1.69.1.6.4.1.6.12 -> 2 (i32)
TLV-11[173]: 1.3.6.1.2.1.69.1.6.4.1.7.12 -> 0.0.0.0
TLV-11[174]: 1.3.6.1.2.1.69.1.6.4.1.8.12 -> 0.0.0.0
TLV-11[175]: 1.3.6.1.2.1.69.1.6.4.1.9.12 -> 192.168.0.0
TLV-11[176]: 1.3.6.1.2.1.69.1.6.4.1.10.12 -> 255.255.0.0
TLV-11[177]: 1.3.6.1.2.1.69.1.6.4.1.11.12 -> 256 (i32)
TLV-11[178]: 1.3.6.1.2.1.69.1.6.4.1.12.12 -> 0 (i32)
TLV-11[179]: 1.3.6.1.2.1.69.1.6.4.1.13.12 -> 65535 (i32)
TLV-11[180]: 1.3.6.1.2.1.69.1.6.4.1.14.12 -> 0 (i32)
TLV-11[181]: 1.3.6.1.2.1.69.1.6.4.1.15.12 -> 65535 (i32)
TLV-11[182]: 1.3.6.1.2.1.69.1.6.4.1.2.13 -> 4 (i32)
TLV-11[183]: 1.3.6.1.2.1.69.1.6.4.1.3.13 -> 1 (i32)
TLV-11[184]: 1.3.6.1.2.1.69.1.6.4.1.4.13 -> 1 (i32)
TLV-11[185]: 1.3.6.1.2.1.69.1.6.4.1.5.13 -> 1 (i32)
TLV-11[186]: 1.3.6.1.2.1.69.1.6.4.1.6.13 -> 2 (i32)
TLV-11[187]: 1.3.6.1.2.1.69.1.6.4.1.7.13 -> 0.0.0.0
TLV-11[188]: 1.3.6.1.2.1.69.1.6.4.1.8.13 -> 0.0.0.0
TLV-11[189]: 1.3.6.1.2.1.69.1.6.4.1.9.13 -> 7.0.0.0
TLV-11[190]: 1.3.6.1.2.1.69.1.6.4.1.10.13 -> 255.0.0.0
TLV-11[191]: 1.3.6.1.2.1.69.1.6.4.1.11.13 -> 256 (i32)
TLV-11[192]: 1.3.6.1.2.1.69.1.6.4.1.12.13 -> 0 (i32)
TLV-11[193]: 1.3.6.1.2.1.69.1.6.4.1.13.13 -> 65535 (i32)
TLV-11[194]: 1.3.6.1.2.1.69.1.6.4.1.14.13 -> 0 (i32)
TLV-11[195]: 1.3.6.1.2.1.69.1.6.4.1.15.13 -> 65535 (i32)
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to :225
Insufficient heap to handle SNMP packet - TOO_BIG.
(PDU = 231272, heap = 186180)
TLV-11 failure: error status=1, error index=0
Invalid TLV-11's: 1 wrong values, 0 duplicate sets.
SNMP Error'd but Haxorware doesn't care AT ALL!
Onwards mateys!

Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x00013b82 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
0x00013b82 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TxRegAckMsg: (CmDocsisCtlThread) upstream already using standard short/long grant profiles. downshift NOT required.
0x00013b8c [CmDocsisCtlThread] BcmCmDocsisCtlThread::TxRegAckMsg: (CmDocsisCtlThread) upstream type 2 upshift to adv phy burst profiles!
Registration complete!
Process CVC
0x00013baa [CmDocsisCtlThread] CmSecureDownload::CmCodeVerificationCertificate:TonguearseAndValidate: (Secure Software Download) ERROR - Failed on rsaDecryptSignature, status=0x1
0x00013baa [CmDocsisCtlThread] CmSecureDownload:TonguerocessConfigFileSpecifiedCvc: (Secure Software Download) ERROR - Config file co-signer CVC is rejected.
0x00013baa [CmDocsisCtlThread] CmSecureDownload:TonguerocessConfigFileManufAndCosignerCvcs: (Secure Software Download) ERROR - Reject config file MSO CVC!
0x00013baa [CmDocsisCtlThread] BcmCmDocsisCtlThread:TonguerocessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a valid CVC!
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x00013bb4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM disabled via manufacturing setting.
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread
0x00013be6 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x00013be6 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x00013bf0 [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x00013bf0 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x00013bf0 [Motorola Standby Switch Thread] BcmStandbySwitchThread:TonguerocessSwitchEvent: (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
Logging event: TLV-11 - Illegal Set operation failed
Logging event: Configuration File CVC Validation Failure
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 2296948624, control for level 7 is 0.
Non-Vol Settings successfully written to the device.

CM>


****edit removed identifiable infomation****

RE: Sb5100 - drewmerc - 20-11-2011

Insufficient heap to handle SNMP packet - TOO_BIG.

switch to haxorware lite (i guess)