+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Does anyone have any firmware without certs? (/showthread.php?tid=4516)
RE: Does anyone have any firmware without certs? - occalifornia - 17-07-2017
(17-07-2017, 06:28 PM)ncb Wrote:(17-07-2017, 06:16 PM)occalifornia Wrote:(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?
The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.
Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.
Continues to work fine for me. You could fail to lock channels for other reasons.
RE: Does anyone have any firmware without certs? - Ictvtec - 18-07-2017
Did u try to see if stock firmware locks on??
(17-07-2017, 06:28 PM)ncb Wrote:(17-07-2017, 06:16 PM)occalifornia Wrote:(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?
The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.
Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.
RE: Does anyone have any firmware without certs? - legendofsounds - 18-07-2017
(18-07-2017, 01:11 AM)Ictvtec Wrote: Did u try to see if stock firmware locks on??
(17-07-2017, 06:28 PM)ncb Wrote:(17-07-2017, 06:16 PM)occalifornia Wrote:(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?
The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.
Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.
id stay away from v8 modems specially the white ones if using forceware on them... just saying
RE: Does anyone have any firmware without certs? - occalifornia - 18-07-2017
(18-07-2017, 10:35 PM)legendofsounds Wrote:(18-07-2017, 01:11 AM)Ictvtec Wrote: Did u try to see if stock firmware locks on??
(17-07-2017, 06:28 PM)ncb Wrote:(17-07-2017, 06:16 PM)occalifornia Wrote:(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?
The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.
Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.
id stay away from v8 modems specially the white ones if using forceware on them... just saying
why?
RE: Does anyone have any firmware without certs? - McAdams - 20-07-2017
(18-07-2017, 10:56 PM)occalifornia Wrote:(18-07-2017, 10:35 PM)legendofsounds Wrote:(18-07-2017, 01:11 AM)Ictvtec Wrote: Did u try to see if stock firmware locks on??
(17-07-2017, 06:28 PM)ncb Wrote:(17-07-2017, 06:16 PM)occalifornia Wrote: The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.
Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.
id stay away from v8 modems specially the white ones if using forceware on them... just saying
why?
x2?
RE: Does anyone have any firmware without certs? - vbhxdnfk - 02-11-2017
Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH
Boot Version: PSPU-Boot(25CLK)(W) 1.0.12.18m5
Hardware Version: 8.0
Firmware Build Time: Jan 22 2015 14:31:03
RE: Does anyone have any firmware without certs? - occalifornia - 02-11-2017
(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH
Is forceware built upon that SB_KOMODO build or is that from your stock modem?
Your upstream power level seems way too high.
http://www.scte.org/TechnicalColumns/06-06-01%20more%20on%20cable%20modem%20upstream%20signal%20levels.pdf
RE: Does anyone have any firmware without certs? - vbhxdnfk - 02-11-2017
(02-11-2017, 04:21 AM)occalifornia Wrote:(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH
Is forceware built upon that SB_KOMODO build or is that from your stock modem?
Your upstream power level seems way too high.
http://www.scte.org/TechnicalColumns/06-06-01%20more%20on%20cable%20modem%20upstream%20signal%20levels.pdf
I have collected those information when SB6141 was a virgin.
RE: Does anyone have any firmware without certs? - occalifornia - 02-11-2017
(02-11-2017, 11:36 AM)vbhxdnfk Wrote:(02-11-2017, 04:21 AM)occalifornia Wrote:(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH
Is forceware built upon that SB_KOMODO build or is that from your stock modem?
Your upstream power level seems way too high.
http://www.scte.org/TechnicalColumns/06-06-01%20more%20on%20cable%20modem%20upstream%20signal%20levels.pdf
I have collected those information when SB6141 was a virgin.
That can't be true because a 6141 doesn't come 'virgin' with forceware firmware..
RE: Does anyone have any firmware without certs? - vbhxdnfk - 04-11-2017
(02-11-2017, 04:39 PM)occalifornia Wrote:(02-11-2017, 11:36 AM)vbhxdnfk Wrote:(02-11-2017, 04:21 AM)occalifornia Wrote:(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH
Is forceware built upon that SB_KOMODO build or is that from your stock modem?
Your upstream power level seems way too high.
http://www.scte.org/TechnicalColumns/06-06-01%20more%20on%20cable%20modem%20upstream%20signal%20levels.pdf
I have collected those information when SB6141 was a virgin.
That can't be true because a 6141 doesn't come 'virgin' with forceware firmware..
I supposed that 'virgin' refers to official firmware...
I mean the official firmware loaded on SB6141 when I bought it.