+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Thompson/RCA DCM425C Flashing -- Linux snmp bash script (/showthread.php?tid=1135)
RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - jmoney27288 - 21-10-2012
done this with a cpu power button and no serial very simple thanks yall
RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - usajinshan - 03-03-2013
I USE COM ,,USE PUTTY TOO,,,,BUT WHEN I SEE LIST 1,2,..P ,,,I CHOOSE "p" ,,,CAN NOT WORKING,,,HOW CAN I TO DO ???
RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - drewmerc - 03-03-2013
first up dont spam the same damn question over every dcm thread you can find, it is pointless and pisses me off
what you need to do is short pin 1 and 2 when the modem is booting so to crash the bootloader
![[Image: oc9sN.jpg]](http://i.imgur.com/oc9sN.jpg)
RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - ABMJR - 03-03-2013
I cant wait for his response....Should be cute
RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - cayman - 04-03-2013
There is a script to load haxor and read all Tsop, in case somebody is smart enough to make backup.
Do not know, it is probably not right place to post it here, since we discuss here dead haxorware
RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - pretje - 08-08-2014
Hi.
I tried to install haxorware in my TCM420 using TFTP. Server is running under 192.168.100.10 and the bash script gives me response like this:
Code:
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1 s password
Press ENTER to continue...Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1
snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
Press ENTER to continue...iso.3.6.1.2.1.1.1.0 = STRING: "Thomson DOCSIS Cable Modem <<HW_REV: 4.0; VENDOR: Thomson; BOOTR: 2.1.6d; SW_REV: ST52.02.03; MODEL: TCM420>>"
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0 a 192.168.100.10
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0 s haxorware.bin
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 2
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0
krzysztof@Lenovo-B590:~/Pulpit$ clear
krzysztof@Lenovo-B590:~/Pulpit$ ./haxorware
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1 s password
Press ENTER to continue...Error in packet.
Reason: notWritable (That object does not support modification)
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.1.2.1.2.1
snmpget -v2c -c public 192.168.100.1 1.3.6.1.2.1.1.1.0
Press ENTER to continue...iso.3.6.1.2.1.1.1.0 = STRING: "Thomson DOCSIS Cable Modem <<HW_REV: 4.0; VENDOR: Thomson; BOOTR: 2.1.6d; SW_REV: ST52.02.03; MODEL: TCM420>>"
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0 a 192.168.100.10
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0 s haxorware.bin
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5.0
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 2
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0
snmpwalk -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2
Press ENTER to continue...iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 = No more variables left in this MIB View (It is past the end of the MIB tree)
snmpset -v2c -c public 192.168.100.1 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0 i 1
Press ENTER to continue...Error in packet.
Reason: noAccess
Failed object: iso.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6.0RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - mahesh kumar singh - 01-07-2016
How to get hexoware files and step by step flashing process for dpc2100 mordem
RE: Thompson/RCA DCM425C Flashing -- Linux snmp bash script - madman12 - 01-07-2016
(01-07-2016, 06:12 AM)mahesh kumar singh Wrote: How to get hexoware files and step by step flashing process for dpc2100 mordem
how you find site this.
