+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: SIGMA X2 on SB5101 (/showthread.php?tid=1656)
RE: SIGMA X2 on SB5101 - jesesystem - 22-06-2012
(22-06-2012, 06:05 AM)drewmerc Wrote: NT is a jtag not a file
anyways you modem is now crashing on boot you just need to detect as soon as you power on the modem then reflash (the debrick commands are only needed if you fucked the bootloader by flashing a 2mb bin)
ok im gonna tell the true
i flashed it before with black cat and the sb5100 procedure ("flash" tab select write all(sb5100_NOSH)the 2mb .bin, then "sb5100" tab select program), but i didnt get to the bootloader step, so i just followed those 2 steps.
can i still recover the modem from that ?
as i said before, i still can see it on jtag utlity program if i type detect, only thing i cant do is make it blink again, even after i flashed the SB5101 .bin you guys gave me.
RE: SIGMA X2 on SB5101 - drewmerc - 22-06-2012
flash it back to stock then and start fresh
RE: SIGMA X2 on SB5101 - jesesystem - 22-06-2012
(22-06-2012, 04:10 PM)drewmerc Wrote: flash it back to stock then and start fresh
with the file you atached on the post #13 ?
http://www.haxorware.com/forums/thread-950-post-5450.html#pid5450
excuse my ignorance but what program should i use, jtag utility or black cat program ?
Edit: i have another sb5101 haxorware modem still working, can i get the files to restore to stock from that modem ?
RE: SIGMA X2 on SB5101 - drewmerc - 22-06-2012
18 posts and you don't know what stock is? flash it with the original back up you made before you started playing with it
if you don't have a backup (which is fucking dumb) using the working haxor modem go to backup/restore save a 2mb dump and flash it to your none modem
RE: SIGMA X2 on SB5101 - jesesystem - 22-06-2012
(22-06-2012, 04:53 PM)drewmerc Wrote: 18 posts and you don't know what stock is? flash it with the original back up you made before you started playing with it
if you don't have a backup (which is fucking dumb) using the working haxor modem go to backup/restore save a 2mb dump and flash it to your none modem
thank you and be petient :S
i know what stock is, i just dont know how to get to stock, as i never did it before.
i assume i have to do it with jtag utility, the same steps to flash the haxorware version...
i just dont want to fuck even more my modem, its still alive, i already made a mistake so just dont want to kill it entirely
RE: SIGMA X2 on SB5101 - TheForce - 22-06-2012
(22-06-2012, 05:12 PM)jesesystem Wrote:(22-06-2012, 04:53 PM)drewmerc Wrote: 18 posts and you don't know what stock is? flash it with the original back up you made before you started playing with it
if you don't have a backup (which is fucking dumb) using the working haxor modem go to backup/restore save a 2mb dump and flash it to your none modem
thank you and be petient :S
i know what stock is, i just dont know how to get to stock, as i never did it before.
i assume i have to do it with jtag utility, the same steps to flash the haxorware version...
i just dont want to fuck even more my modem, its still alive, i already made a mistake so just dont want to kill it entirely
There's No Way To Fully Kill Your Modem Unless You Take A Hammer And You Know.... And Might I Recommend That You Do More Research.
Great Site To Inform Yourself:
http://www.sbhacker.net
http://haxorware.com
http://www.blackcatusb.net
http://www.forocable.com
http://www.wizardmods.net
RE: SIGMA X2 on SB5101 - jesesystem - 22-06-2012
(22-06-2012, 05:25 PM)TheForce Wrote:(22-06-2012, 05:12 PM)jesesystem Wrote:(22-06-2012, 04:53 PM)drewmerc Wrote: 18 posts and you don't know what stock is? flash it with the original back up you made before you started playing with it
if you don't have a backup (which is fucking dumb) using the working haxor modem go to backup/restore save a 2mb dump and flash it to your none modem
thank you and be petient :S
i know what stock is, i just dont know how to get to stock, as i never did it before.
i assume i have to do it with jtag utility, the same steps to flash the haxorware version...
i just dont want to fuck even more my modem, its still alive, i already made a mistake so just dont want to kill it entirely
There's No Way To Fully Kill Your Modem Unless You Take A Hammer And You Know.... And Might I Recommend That You Do More Research.
Great Site To Inform Yourself:
http://www.sbhacker.net
http://haxorware.com
http://www.blackcatusb.net
http://www.forocable.com
http://www.wizardmods.net
i have been on some of those sites, and are helpful
i already did the 2mb back up from my working sb5101, i just want to know what program should i use to program the 2mb dump on my non working sb5101 modem
can you guyz advice me on that ?
RE: SIGMA X2 on SB5101 - drewmerc - 22-06-2012
what ever you feel most comfortable using, for me it's toms
RE: SIGMA X2 on SB5101 - TheForce - 22-06-2012
(22-06-2012, 05:45 PM)jesesystem Wrote:(22-06-2012, 05:25 PM)TheForce Wrote:(22-06-2012, 05:12 PM)jesesystem Wrote:(22-06-2012, 04:53 PM)drewmerc Wrote: 18 posts and you don't know what stock is? flash it with the original back up you made before you started playing with it
if you don't have a backup (which is fucking dumb) using the working haxor modem go to backup/restore save a 2mb dump and flash it to your none modem
thank you and be petient :S
i know what stock is, i just dont know how to get to stock, as i never did it before.
i assume i have to do it with jtag utility, the same steps to flash the haxorware version...
i just dont want to fuck even more my modem, its still alive, i already made a mistake so just dont want to kill it entirely
There's No Way To Fully Kill Your Modem Unless You Take A Hammer And You Know.... And Might I Recommend That You Do More Research.
Great Site To Inform Yourself:
http://www.sbhacker.net
http://haxorware.com
http://www.blackcatusb.net
http://www.forocable.com
http://www.wizardmods.net
i have been on some of those sites, and are helpful
i already did the 2mb back up from my working sb5101, i just want to know what program should i use to program the 2mb dump on my non working sb5101 modem
can you guyz advice me on that ?
Well Are You Using A Blackcat?
RE: SIGMA X2 on SB5101 - jesesystem - 22-06-2012
(22-06-2012, 06:06 PM)TheForce Wrote:(22-06-2012, 05:45 PM)jesesystem Wrote:(22-06-2012, 05:25 PM)TheForce Wrote:(22-06-2012, 05:12 PM)jesesystem Wrote:(22-06-2012, 04:53 PM)drewmerc Wrote: 18 posts and you don't know what stock is? flash it with the original back up you made before you started playing with it
if you don't have a backup (which is fucking dumb) using the working haxor modem go to backup/restore save a 2mb dump and flash it to your none modem
thank you and be petient :S
i know what stock is, i just dont know how to get to stock, as i never did it before.
i assume i have to do it with jtag utility, the same steps to flash the haxorware version...
i just dont want to fuck even more my modem, its still alive, i already made a mistake so just dont want to kill it entirely
There's No Way To Fully Kill Your Modem Unless You Take A Hammer And You Know.... And Might I Recommend That You Do More Research.
Great Site To Inform Yourself:
http://www.sbhacker.net
http://haxorware.com
http://www.blackcatusb.net
http://www.forocable.com
http://www.wizardmods.net
i have been on some of those sites, and are helpful
i already did the 2mb back up from my working sb5101, i just want to know what program should i use to program the 2mb dump on my non working sb5101 modem
can you guyz advice me on that ?
Well Are You Using A Blackcat?
black cat did the trick with first step, i just programed the 2mb dump, and its working now, i can see the blinking green leds
so now i just have to program it with the file you guys gave me on tom´s jtag utility
detect
ldram 9fc10000
*select file and open*
program 9fc10000 130000
rite ?